The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Gearbox, Clutch, Primary => Topic started by: Tone on 05.12. 2008 20:42

Title: assembling gearbox
Post by: Tone on 05.12. 2008 20:42

Hi All, I'm about to put my gearbox together,and in the haynes manual it says to fit the camplate so that the plunger engages with neutural cutaway. Which is the neutral cutaway?

l

Title: Re: assembling gearbox
Post by: trevinoz on 05.12. 2008 22:21

It is the shallow cutaway second from one end. All the gear positions are much deeper.
  Trev.