The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Gearbox, Clutch, Primary => Topic started by: Ron B on 01.08. 2013 10:29

Title: A series gearbox clutch side ball bearing
Post by: Ron B on 01.08. 2013 10:29

Is BSA bearing #24-4065 a 6207 industry standard metric bearing?  Cannot find that information. Thanks Ron B.

Title: Re: A series gearbox clutch side ball bearing
Post by: morris on 01.08. 2013 21:30

Hi Ron,
yes it is. Service sheet # 703 says part 24-4065 = 6207
I have measured an old one I had lying around. Its 72mm exterior x 17 mm thickness