The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Lucas, Ignition, Charging, Electrical => Topic started by: Stephen Foster on 06.12. 2013 14:15

Title: None A10 Im afraid ! Trying to get a Wipac Flywheel re-magnetized ?
Post by: Stephen Foster on 06.12. 2013 14:15

Trying to get the flywheel re-magnetized for My 1949 D1 B.S.A Bantam ("Geni-mag") .
Does Anyone have a contact offering this please ?

Thanks in advance ,
Steve ...

Title: Re: None A10 Im afraid ! Trying to get a Wipac Flywheel re-magnetized ?
Post by: a101960 on 06.12. 2013 16:17

Try Brightspark. Its worth an ask
John

Title: Re: None A10 Im afraid ! Trying to get a Wipac Flywheel re-magnetized ?
Post by: Stephen Foster on 06.12. 2013 16:22

I tried to email "Brightspark" earlier but the email coudnt be sent ...some message saying emaill address unrecognised ?
Does Anyone have a phone number for them please ?

Steve ..

Title: Re: None A10 Im afraid ! Trying to get a Wipac Flywheel re-magnetized ?
Post by: chaterlea25 on 06.12. 2013 17:51

Hi Steve,
The only flywheel mag I have had re magnetised was a Morini which was done through North Leicester Motorcycles
Villiers Services would also be worth a try
HTH
John

Title: Re: None A10 Im afraid ! Trying to get a Wipac Flywheel re-magnetized ?
Post by: RichardL on 06.12. 2013 19:07

Just tried the Brightspark email as a test and already got a reply from Bill. I din't ask him about your Wipac issue.

Title: Re: None A10 Im afraid ! Trying to get a Wipac Flywheel re-magnetized ?
Post by: Stephen Foster on 10.01. 2014 07:59

Thanks for the replies ..unfortuately still no joy ?
Has Anyone had this done on the Wipac flywheel ?

Belated Best Wishes for 2014 !

Title: Re: None A10 Im afraid ! Trying to get a Wipac Flywheel re-magnetized ?
Post by: RichardL on 10.01. 2014 12:21

For contacting Brightspark you could try ken@brightsparkmagnetos.com or send personal messages through the forum to members KenF and Groily.

When I needed my K2f magnetized I phoned-up a local magnet supplier and got them interested in helping out with a vintage motorcycle. We worked our way through three different magnetizers before getting it right and my host stood by while I did the field-strength test using compass deflection as described here in the forum.

Richard L.

Title: Re: None A10 Im afraid ! Trying to get a Wipac Flywheel re-magnetized ?
Post by: Stephen Foster on 10.01. 2014 15:26

I have contacted "Brightspark" but infortunately they do not offer this service for the Wipac flywheel .