The BSA A7-A10 Forum

Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Nourish on 08.12. 2013 22:40

Title: Rigid Frame Lugs
Post by: Nourish on 08.12. 2013 22:40

Rigid frames here in the UK are like hens teeth, I now have a plunger frame so was thinking of having a go at making a rigid bolt on subframe.
I've made the two frame lugs that bolt under the engine using the plunger subframe as a pattern and about to copy the upper lugs, What I don't have is the wheel spindle lugs to copy - can any one give me close up photo's/drawings of these lug/plates and any dimensions would be a great help.
Cheers

Title: Re: Rigid Frame Lugs
Post by: orabanda on 09.12. 2013 02:14

Hi Nourish,
Hope this helps,
Regards,
Richard

Title: Re: Rigid Frame Lugs
Post by: Nourish on 09.12. 2013 09:32

Thanks for that Richard - but not wishing to sound ungrateful - I was looking for some real close up pictures of the spindle area.
On another note - is that a one piece frame or is that a subframe?

Title: Re: Rigid Frame Lugs
Post by: orabanda on 09.12. 2013 10:06

I will get a chance to see the bike on Saturday, so will take some close-ups then; stay tuned for BSA nrop!