The BSA A7-A10 Forum

Technical => A7 & A10 Engine => Topic started by: anjimehra on 30.01. 2014 07:36

Title: A7 plunger sizes of bolts & studs
Post by: anjimehra on 30.01. 2014 07:36
Hi guys

Another poser !!

Need to get a complete list of nuts, bolts studs etc for the 1951 A 7 as the ones promised with the basket case never materialised. Any idea where i can get this list showing dias, lengths threads etc.
Thanks
Anji

adm edit: duplicate topics merged & title changed to reflect content
Title: Re: A7 plunger sizes of bolts & studs
Post by: bsa-bill on 30.01. 2014 09:56
Good starting point
http://www.draganfly.co.uk/index.php/bsa/bsa/category/72-a710--b3133--c101112--m202133 (http://www.draganfly.co.uk/index.php/bsa/bsa/category/72-a710--b3133--c101112--m202133)

might have to trawl through the various sections, I recall a catalogue that had a section at the rear with all bolts, nuts and studs listed with part numbers and description but can't remeber who's it was = perhaps someone knows
Title: Re: A7 plunger sizes of bolts & studs
Post by: anjimehra on 31.01. 2014 03:24
Hi

Any idea where one can get the sizes & specs of engine & gear box bolts & studs ( dia, threads etc. ) Need to get a set made
Thanks
Anji
Title: Re: A7 plunger sizes of bolts & studs
Post by: muskrat on 31.01. 2014 06:14
G'day Anji.
Have a look here http://www.a7a10.net/forum/index.php?topic=1713.msg11421
If you have a parts book to look up the #'s.
Cheers
Title: Re: A7 plunger sizes of bolts & studs
Post by: anjimehra on 31.01. 2014 10:26

Good starting point
http://www.draganfly.co.uk/index.php/bsa/bsa/category/72-a710--b3133--c101112--m202133 (http://www.draganfly.co.uk/index.php/bsa/bsa/category/72-a710--b3133--c101112--m202133)

might have to trawl through the various sections, I recall a catalogue that had a section at the rear with all bolts, nuts and studs listed with part numbers and description but can't remeber who's it was = perhaps someone knows

Thanx Bill. Will do the trawling & see if I can isolate what I want
Title: Re: A7 plunger sizes of bolts & studs
Post by: pato08 on 31.01. 2014 22:11
Hi Anji

You could also try  www.motalia.net  they are in Norfolk England, they do Cycle - BSF - Whitworth - UNF, all in stainless

Pato