The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => A7 & A10 Engine => Topic started by: Erico on 16.06. 2014 23:57
-
Has anyone successfully tapped the inner timing cover and fitted a grease nipple to pump in grease to lube the dynamo chain *????* Thanks
-
Why would you bother? The chain gets plenty of lubrication if it is packed properly with the correct grease.
Trev.
-
G'day Erico, *welcome*.
To answer the question, yes. A new girl in my club has a long stroke with that done. I'm not sure what greese it was but what a mess when I took the cover off *eek*.
I agree with Trev.
Cheers
-
Thanks for the welcome guys. The reason I asked the question is I've rebuilt the engine and only smeared a bit of grease on the chain. Its oil tight and after having to do everything twice because of rubbish gaskets slipping and sliding out of all the joints. I don't want to take things apart again. I just want ride the thing. I've flattened off all mating joints on a surface plate with WD40 and fine wet and dry. Red instant gasket give that old timer look and works a treat, no leaks. Talk soon *smiley4*