The BSA A7-A10 Forum

Technical => Lucas, Electrical, Ignition => Topic started by: a101960 on 03.07. 2014 12:00

Title: RGS QD plug in headlamp shell
Post by: a101960 on 03.07. 2014 12:00
I am getting ready to assemble my QD plug in headlamp shell. The one thing I do not have is the QD headlamp wiring socket retaining nuts and bolts (or should that be screws)? Does anyone know what size they should be?
Title: Re: RGS QD plug in headlamp shell
Post by: trevinoz on 06.07. 2014 07:33
A10,
            The screws on mine are 4BA x 3/8" round head with nuts and star washers. There is also a round reinforcing ring on the inside, if you didn't know.

Trev.
Title: Re: RGS QD plug in headlamp shell
Post by: a101960 on 06.07. 2014 10:10
Trev, thank you for that information. I do have the reinforcing ring. I got the complete plug and socket replacement kit from Tricor, but for some reason the fasteners were not included in the kit. I shall get some ordered ASAP.
(http://)

John
Title: Re: RGS QD plug in headlamp shell
Post by: wilko on 07.07. 2014 00:31
Most british electricals used BA threads.