The BSA A7-A10 Forum

Technical => Frame => Topic started by: Chrisf1 on 10.02. 2009 18:10

Title: FIBREGLASS TANK
Post by: Chrisf1 on 10.02. 2009 18:10
Hi again everyone can I please ask for advice on the use of modern petrol in fibreglass tanks. I am sure I have heard that it rots them and I am looking at a second tank for mine which is fibreglass any knowledgeable information on this subject welcome thanks Chris
Title: Re: FIBREGLASS TANK
Post by: beezalex on 10.02. 2009 19:02
I have had excellent results using caswell epoxy tank liner.  I've rescued tanks that were gumming up carbs with good success.  One caveat: IME, fiberglass tanks require twice as much liner material for full coverage, I am guessing because of the roughness of the inside.
Title: Re: FIBREGLASS TANK
Post by: dpaddock on 27.02. 2009 14:55
Gorgeous bike, there, Chris!
Preserve your steel tank with Kreem.
     David