The BSA A7-A10 Forum

Technical => A7 & A10 Engine => Topic started by: coater87 on 31.07. 2014 22:04

Title: roller bearing conversion in the U.S.
Post by: coater87 on 31.07. 2014 22:04
 Hello again fellows.

 Unfortunately my laptop died on me a few weeks back, and with it all of my links and favorites.

 I dont remember if it was this board, or a different one. But either way, someone mentioned a

 shop that does the needle/roller conversion over here in the states. It was not Frank Deihl, and British only sends them to

 SRM now.

 Does anyone reading this remember or know the name of this shop?