The BSA A7-A10 Forum
Technical (Descriptive Topic Titles - Stay on Topic) => Frame => Topic started by: Terryb on 28.12. 2014 19:09
-
Can anybody confirm that the offset of 9/16" is correct for a front wheel 19" WM2 rim with a half width 8" hub? Thanks. *conf*
Terryb
-
if that's what it takes to get it central between the forks
-
When I dismantled my half width plunger's front wheel I measured 17mm all around with the brake side flat on the bench.
Corresponds to a little under 11/16
-
Hi All,
Thanks for the information, I achieved just over 15mm from the brake flange and it sitting nicely central between the forks. Now for the rear one.
Cheers Happy New Year
Terryb