The BSA A7-A10 Forum

Bikes, Pictures, Stories & more => Chat, Offtopic, Meetings & Everything Else => Topic started by: nimrod650 on 10.05. 2015 17:44

Title: ignition light
Post by: nimrod650 on 10.05. 2015 17:44
 can anyone help regarding how to wire ignition warning light on pre unit alternator triumph 6t red light on naccelle not connected not the right forum but worth a try thanks
Title: Re: ignition light
Post by: Triton Thrasher on 10.05. 2015 18:45
Ignition lights are straightforward on vehicles with a dynamo and an ignition switch.

On a 6V Lucas alternator system, I'd want to know what you expect the light to warn you of.  The ammeter gives you an indication of charge and discharge.
Title: Re: ignition light
Post by: nimrod650 on 12.05. 2015 19:18
thanks for reply i think the light has been used to blank where the stop button fits on the mag models the alternator model doesnt have this might fit a prop stand warning light
Title: Re: ignition light
Post by: Triton Thrasher on 12.05. 2015 21:11
A main beam warning light or LED, might be useful.
Title: Re: ignition light
Post by: wilko on 14.05. 2015 06:42
norton commandos use a little electrical gizmo that activates an  ignition light.But they're 12 volt. look up a wiring diagram. Senility has made me forget what it's called.
Title: Re: ignition light
Post by: Triton Thrasher on 14.05. 2015 06:45
Is it the emulator?
Title: Re: ignition light
Post by: Butch (cb) on 14.05. 2015 13:09
Didn't Rod Hull spend long years up to his armpit in one of those?
Title: Re: ignition light
Post by: bsa-bill on 14.05. 2015 14:32
Quote
Didn't Rod Hull spend long years up to his armpit in one of those?

like (more than Parky did)