The BSA A7-A10 Forum

Technical => Lucas, Electrical, Ignition => Topic started by: KeithA on 28.10. 2015 12:55

Title: K2F mag
Post by: KeithA on 28.10. 2015 12:55
Hello all;
I have tried to remove the auto advance unit from my K2F mag, so I can withdraw the mag for an overhaul.
I undone the bolt (with horseshoe washer under it) anticlock wise.
It has undone about 6 turns, then became tight. I don't want to force it. Am I doing something wrong.
Any advise please.
Thanks in advance.
Keith Atkinson
Title: Re: K2F mag
Post by: bsa-bill on 28.10. 2015 13:02
probably not Keith,  lt will become tighter as it starts to pull the A/U unit off it's taper, proviso is what your definition of tight is compared to others, but will go from slack to tighter
Title: Re: K2F mag
Post by: KeithA on 28.10. 2015 13:07
Yes it has probably not gone tight as in very tight, but I just thought it should just unscrew normally.
I'd like to ask first rather than break something.
Thanks Keith