Not Just A Picture.

[kiwipom]

Hi guys/Scott or Jay, over the years I have put snippets of progress but basically I bought this bike in 1990/91 as a Gold Flash but it needed work. Being a fan of café racer style I decided to customize it to a like style. I put full width hubs with crossover brake and twin leader to front plus many new rolling chassis parts including c/p guards/Stanchions and springs/headlight/tail light/handlebars. For the engine it was crank recon with grind and shells/billet rods/thick flange barrels with new pistons/Ali head with new valves and guides/srm oil pump just to name a few. I have also converted to electronic ignition plus 12v electrics running belt drive, also belt drive clutch. I installed all new wiring with fuses for everything plus indicators and front brake operated rear light, also an oil filter and oil gauge plus a carrier, nut and bolt restoration, cheers

[duTch]

 nice one KP- wasn't havin' a go at anyone, just respecting the topic, and sometimes we need to be a bit brutal

[kiwipom]

No worries Dutch, but ain't it good to be human, someone makes a rule and others reinforce it to be popular, cheers

[mikeb]

very nice  not a GF any more...
whats the key in the toolbox for? (ignition no doubt, but does what?)
any chance of a closeup of how you set the front brake switch (or is it an a65 type cable switch thing)??

[kiwipom]

Hi Mikeb, the key cuts everything except park lights, I will post front brake operated rear light pics next week when I return from Nelson , cheers

[mikeb]

ok cheers Kiwi. i was in nelson last week and walked forlornly past where the classic bike museum used to be  . just not the town it used to be...

[kiwipom]

hi guys/MikeB, mike some pics of the front brake lever operated stop light. Hope you can make sense of how I did it probably could be made a lot simpler but I just used what I had available, cheers