Author Topic: First BSA A7 .  (Read 1740 times)

BSABeginner

  • Guest
First BSA A7 .
« on: 18.03. 2011 22:59 »
Hi
I have had bikes for years but have just bought my first classic BSA  A7 and feel like I am having to learn everything again .
The old lad I bought her from called her Betty and I think she looks lovely and Betty is a good name for her .
Wife thinks I have finally cracked .

I am working my way through the Haynes manual but was hoping for some basic tips to help me make it through the first 12 months without breaking anything on her or me !

Any suggestions no matter how daft would be gratefully received .

Offline brackenfel

  • Valued Contributor
  • ****
  • Join Date: Jan 2010
  • Posts: 273
  • Karma: 2
  • Adrian - Bristol UK
Re: First BSA A7 .
« Reply #1 on: 19.03. 2011 09:45 »
Congratulations on your purchase and welcome to the Forum !
I have found this a very friendly and invaluable source of information, I'm sure you will find the same..
Just keep an eye on the various topics that arise & I'm sure you'll learn a lot about BSAs, I certainly have... The Haynes can be a bit vague in places but it's not a bad place to start.

From the picture "Betty" looks to be a later model & if the previous owner was long-term I doubt if you'll have much trouble.. Like anything new to you, put fresh oil everywhere, check it over and then go out and enjoy riding!

If anything does then give cause for concern a quick post here on the particular issue will soon get a host of helpful responses, usually based on finding out the hard way!..

All the best,

Adrian
1961 A10 650 Golden Flash - Blue
1954 BSA B33
Velocette Viper
Laverda 750 SF1
Kawasaki W650
Buell XB9S
Ariel 350NH & Matchless G3LS in bits...

Offline Sidcar

  • Moving Up
  • **
  • Join Date: Feb 2011
  • Posts: 32
  • Karma: 0
Re: First BSA A7 .
« Reply #2 on: 19.03. 2011 11:58 »
Hi BSABegginer,
Best way to get to know your bike is to ride it. If your anywhere near Banbury get down to the Banbury Cross 7.00 am tomorrow and join us for a breakfast run.

Sid *smile*

BSABeginner

  • Guest
Re: First BSA A7 .
« Reply #3 on: 19.03. 2011 12:32 »
Thanks Adrian /Sid
I am afraid I  live in the North of Scotland but hopefully the weather will improve to allow me to get out on her.
My first run out when I first  got her home was a real challenge just trying to get her in the right gear but I
loved it and sure I will get better .
Thanks for the advice and I think I will be visiting the forum on a regular basis for  help .

Ron

Offline Goldy

  • Warwickshire, England
  • Resident Legend
  • *****
  • Join Date: Dec 2008
  • Posts: 619
  • Karma: 9
Re: First BSA A7 .
« Reply #4 on: 19.03. 2011 17:36 »
Hi BSABeginner. If it,s your first classic then the main thing is to service it regularly. Check the tank oil level every time you go out. Change the oil frequently. It should have a six spring clutch and this needs to be correctly adjusted, so keep an eye on it. Main thing is to enjoy  riding it. All the best.
56 A10 Golden Flash - Restore, ride, relive.                                          
56 C12 BSA project ongoing

BSABeginner

  • Guest
Re: First BSA A7 .
« Reply #5 on: 19.03. 2011 19:49 »
Thanks Goldy
Wish I had joined the forum before I went out for my first ride . Had thought there was enough petrol to make it to the petrol station !
Did discover the bike is easy to push and I must have lost a few pounds pushing it . Will make sure I service it regulary and change the oil too.
Thanks again for the advise .
Ron

Offline wilko

  • Resident Legend
  • *****
  • Join Date: Mar 2010
  • Posts: 681
  • Karma: 4
Re: First BSA A7 .
« Reply #6 on: 19.03. 2011 22:28 »
If left standing for any length of time drain the crankcase first, or at least check the oil tank for significant oil level drop.

Offline A10Boy

  • Wise & Enlightened
  • *
  • Join Date: Jun 2008
  • Posts: 1078
  • Karma: 11
  • Solihull, Near Birmingham England.
Re: First BSA A7 .
« Reply #7 on: 22.03. 2011 15:45 »
Hi and welcome

Great looking bike, i hope you have many years enjoyment from it. Two things perhaps you ought to be aware of, one already touched on.

First, Wet sumping, you will only get an accurate level in the oil tank after you have ridden it at least 3-4 miles, make a mental note of the level at the end of your journey and when you put it away. Then when you go to start her for your next ride, check the level again before starting, if its dropped, don't be tempted to fill the tank prior to starting unless you have drained the sump. If you top up the oil tank and there's already a pint or two in the sump you will be in a right mess.

Secondly, I wouldn't want to worry you unduly but the only real area of concern I would have on using an unknown A7/A10 is any possible wear on the timing side bush. If its worn, oil pressure to the big ends is reduced which isn't good as you know. Its easy to check - remove the RH exhaust and gear lever, remove the timing side cover catching the oil in a bowl. You will see the end of the crank and if there is more than a few thou play up and down, it will need an overhaul. I know it sounds a lot of work but as they say - a stitch in time etc. If its OK you will have confidence in it. I found wear in the bush when I bought mine and overhauled the engine soon after. Now I have full confidence in it.

The main thing is enjoy it.
Regards

Andy

1958 Super Rocket
Plus
Harley Super Glide Custom
Yam XJR 1300