Author Topic: A10 plunger silencer mounting  (Read 995 times)

Offline beezalex

  • North Carolina, USA
  • Valued Contributor
  • ****
  • Join Date: Jan 2008
  • Posts: 374
  • Karma: 4
A10 plunger silencer mounting
« on: 28.04. 2009 15:01 »
Pretty simple question, really: Do the silencers on plunger A10's mount inboard or outboard of the lug on the frame?  I had trouble getting them to fit inboard, so I have them mounted outboard but they kinda stick out a lot...in fact, so much that I grounded out one of the nice, shiny mufflers the other day.  I've looked at dozens of pictures, but can't find one that shows this.

Thanks in advance.
Alex

Too many BSA's


Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3181
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: A10 plunger silencer mounting
« Reply #1 on: 28.04. 2009 21:41 »
I think it's impossible to mount them on the wheel-side of the frame. And yes, the plunger ground clearance is not fantastic. (In my case, the footpegs touch before the silencers, don't know what's worst or most dangerous, just have to adjust to it and be carefull).

I used shims and spacers to adjust the whole thing to fit quite nicely. See pics (damn this good camera, showing every tiny spot of dust, rust and oil  *smile* )



Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline mrshells

  • A's Good Friend
  • ***
  • Join Date: Aug 2008
  • Posts: 138
  • Karma: 1
  • Lincolnshire
Re: A10 plunger silencer mounting
« Reply #2 on: 28.04. 2009 23:09 »
mine are mounted outboard also neede spacers to get them to sit correctly
pipes came new from Armours
and mine is an A7 but Im pretty sure they are the same as the A10 plunger

Offline beezalex

  • North Carolina, USA
  • Valued Contributor
  • ****
  • Join Date: Jan 2008
  • Posts: 374
  • Karma: 4
Re: A10 plunger silencer mounting
« Reply #3 on: 29.04. 2009 17:34 »
Thanks for the pics.  I think I see what's going on.  My mounting tabs are normal to the silencer OD and whereas is looks like yours bend inward a bit tucking the silencer in a bit.  Maybe that's all I need...to bend the mount tab. 
Alex

Too many BSA's