Author Topic: BSA A10 1960 Swingarm  (Read 439 times)

Offline ellis

  • Valued Contributor
  • ****
  • Join Date: Feb 2016
  • Posts: 387
  • Karma: 3
BSA A10 1960 Swingarm
« on: 23.02. 2016 19:52 »
I am about to fit a new chain case drain/level plug. The one I have taken out of the bike the level tube is 3/4'' long from the threaded part of the plug. However the new  CPC Engineering made plug I have just bought has a tube length of 1-5/16'' long from the plug thread. Dose anyone know the correct length of the tube part of the plug as I don't want to over fill the chain case. *dunno*

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5474
  • Karma: 64
Re: BSA A10 1960 Swingarm
« Reply #1 on: 23.02. 2016 22:29 »
judging by mine I think the new one is correct
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline ellis

  • Valued Contributor
  • ****
  • Join Date: Feb 2016
  • Posts: 387
  • Karma: 3
Re: BSA A10 1960 Swingarm
« Reply #2 on: 23.02. 2016 23:03 »
Thanks bias-bill its always good to have a second opinio