Author Topic: valves  (Read 407 times)

Offline nimrod650

  • Valued Contributor
  • ****
  • Join Date: Feb 2015
  • Posts: 446
  • Karma: 4
valves
« on: 01.03. 2016 18:30 »
two brand new ex valves for a10 alloy head on preloved adds part n0 67-155/v215 wo25854 £45 in bsa parts
Good Advice
0
No reactions

beezermacc

  • Guest
Re: valves
« Reply #1 on: 02.03. 2016 08:17 »
Actually sounds expensive to me! Check my prices......
https://sites.google.com/site/priorymagnetos/cylinder-head
Good Advice
0
No reactions

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5512
  • Karma: 64
Re: valves
« Reply #2 on: 02.03. 2016 15:03 »
sorting out my shed at the mo , I managed to mix up a few valves, I know two of them are bent, if I put them in a drill and spin it on "low" will this be accurate enough to sort the bent from the not bent or is there a better method ( I don't own a lathe)
 And yes your quite right I should of binned them
Good Advice
0
No reactions
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline Topdad

  • bob hebdon
  • Wise & Enlightened
  • *
  • Join Date: May 2011
  • Posts: 2250
  • Karma: 32
  • l
Re: valves
« Reply #3 on: 02.03. 2016 15:43 »
Don't know about that Bill I've keep an exhaust vale on the shelf over the bench as a constant reminder not to be a soft sod again and cut corners cleaning out an OLD oil tank!
Good Advice
0
No reactions
" rules are made for the guidance of wise men and the blind obediance of fools"
United Kingdom