View or Hide Header -->
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
A7 & A10 Engine
A7 1946-1950
Gearbox, Clutch, Primary
Frame
Lucas, Ignition, Charging, Electrical
Amal, Carburation
Entire forum
Google
Home
Help
Search
Contact
Login
Register
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
Frame
»
A10 frame fitting part number, exhaust/crank bush.
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: A10 frame fitting part number, exhaust/crank bush. (Read 1869 times)
Josh Cox
Valued Contributor
Join Date: Apr 2009
Posts: 275
Karma: 0
A10 frame fitting part number, exhaust/crank bush.
«
on:
05.05. 2009 15:01 »
Evening all,
Trying to find a BSA part number for the bushes that fit into the frame joiners at the Exhaust/Crank case mounting point.
The stud PN is 67-1251, apparently there are two bushes, one each side, that hold the front and rear ( top and botton ) of the frame together.
OD approx 14.38mm / 17/32"
ID approx 9.5mm / 3/8"
Thanks in advance.
Logged
Black 1953 Golden Flash Plunger
bsa-bill
Wise & Enlightened
Join Date: Mar 2006
Posts: 5720
Karma: 66
Re: A10 frame fitting part number, exhaust/crank bush.
«
Reply #1 on:
05.05. 2009 17:53 »
Hi Josh - need a bit more info about what model A10 you have
All the best - Bill
Logged
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up would have seizure if taken to Tesco
RichardL
Outside Chicago, IL
Wise & Enlightened
Join Date: Nov 2007
Posts: 6388
Karma: 55
Re: A10 frame fitting part number, exhaust/crank bush.
«
Reply #2 on:
05.05. 2009 18:31 »
Bill,
From the photos, Josh has a plunger.
Josh,
From my parts book, I can't see any bsuhings where you say, but I'm no plunger expert, except in the loo.
Richard L.
Logged
Beezageezauk
N.E. England
Resident Legend
Join Date: Mar 2006
Posts: 669
Karma: 21
Re: A10 frame fitting part number, exhaust/crank bush.
«
Reply #3 on:
05.05. 2009 19:05 »
Hi Josh,
I think I know the ones you mean. My parts book for the plunger and swing arm models up to 1957 shows the stud but not the bushes (spacers). However, my 1958-on parts book shows them quite clearly but obviously for swing arm models.
Described as a "distance piece" the part number is 42-4071 and using a ruler, the one I have in front of me measures about 15mm o/d, 10mm i/d and is about 12mm long. If these measurement are roughly the same as yours the above mentioned part number should be ok.
Unfortunately I'm not too familiar with the Plunger models so I can't be too specific.
Beezageezauk.
Logged
bsa-bill
Wise & Enlightened
Join Date: Mar 2006
Posts: 5720
Karma: 66
Re: A10 frame fitting part number, exhaust/crank bush.
«
Reply #4 on:
05.05. 2009 20:04 »
Richard
My eyes aint what they used to be but when did you see the photos, must have been a previous post
On the subject of eyes, I had to go for a Retinograph ( I'm type 2 like 10% of the population apparently) during my eye test the optician asked when I last had an eye test, I replied I tell her that exactly as I remember the optician saying there was nothing wrong with my eyes apart from they were 45 years old, I am now 65 years old a fact that she took some exeption to in fact I got a bit of a dressing down and told to get an eye test arranged as soon as.
Jeez some of these woman can get stroppy = no respect for the elderly
All the best - Bill
Logged
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up would have seizure if taken to Tesco
RichardL
Outside Chicago, IL
Wise & Enlightened
Join Date: Nov 2007
Posts: 6388
Karma: 55
Re: A10 frame fitting part number, exhaust/crank bush.
«
Reply #5 on:
05.05. 2009 21:08 »
If you click on a member's name you are given his "Summary." At the bottom of that you can click to see all of that member's posts, though it's called "latest posts." I am afraid to look at mine, considering how many there have been. The redeeming factor is that I am a fairly fast typist.
Richard L.
Logged
Josh Cox
Valued Contributor
Join Date: Apr 2009
Posts: 275
Karma: 0
Re: A10 frame fitting part number, exhaust/crank bush.
«
Reply #6 on:
05.05. 2009 23:12 »
1953 Golden Flash Plunger.
My IPC (illustrated parts catalgoue) does not show the bush either, Orabanda Esq assures me he has them in his various bikes and is not visible on his IPC either, so a bit of a mystery.
Width at the joint is approx 30.6mm.
Logged
Black 1953 Golden Flash Plunger
olev
Brisbane, Australia
Resident Legend
Join Date: Sep 2008
Posts: 624
Karma: 5
Re: A10 frame fitting part number, exhaust/crank bush.
«
Reply #7 on:
05.05. 2009 23:43 »
Josh,
I think this is the one you're after.
It measures 9/16"od, 3/8" id and 1 1/8 long.
Its 1/8" shorter than the hole in the frame and made of steel.
Its not in the parts book but should be easy to make.
cheers
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
Frame
»
A10 frame fitting part number, exhaust/crank bush.