Author Topic: inner chaincase bolts  (Read 303 times)

Online ellis

  • Valued Contributor
  • ****
  • Join Date: Feb 2016
  • Posts: 366
  • Karma: 3
inner chaincase bolts
« on: 20.06. 2016 22:05 »
Could anyone tell me the torque setting for the two wire locked bolts in the inner chain case to crank case . I have reassembled the chain case and might have over tightened these bolts because I now have an oil leak from the spacer ring gaskets between the inner chain case and the crank case. If that is possible to do that. Any help would be grateful.      *dunno*

  ELLIS

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5342
  • Karma: 61
Re: inner chaincase bolts
« Reply #1 on: 20.06. 2016 22:16 »
I'd think the front three (large ) studs would pull it up square, one consideration though is the spacer at the rear  of the case, i usually fit the inner case and then pull it up square with the front studs (using washers or spacers in place of the outer cover) then measure what is required if anything for the small spacer/washer at the rear
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Online ellis

  • Valued Contributor
  • ****
  • Join Date: Feb 2016
  • Posts: 366
  • Karma: 3
Re: inner chaincase bolts
« Reply #2 on: 22.06. 2016 11:55 »
Thanks bsa-bill,

I'm not sure I understand where the small spacer/washer is at the rear. Could you enlighten me to where it is please.

ELLIS

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8026
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: inner chaincase bolts
« Reply #3 on: 22.06. 2016 12:27 »
Spacer circled goes between inner primary cover and frame through hole circled.
Cheers
'51 A7 plunger, '57 A7SS now A10CR, '76 XT500, '77 AG175 '83 CB1100F, '81 CB900F project.
Australia
Muskys Plunger A7

Online ellis

  • Valued Contributor
  • ****
  • Join Date: Feb 2016
  • Posts: 366
  • Karma: 3
Re: inner chaincase bolts
« Reply #4 on: 22.06. 2016 19:29 »
Now I see it  *smile*

Cheers muskrat