Author Topic: 1961 Super Rocket  (Read 1158 times)

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 5074
  • Karma: 48
Re: 1961 Super Rocket
« Reply #15 on: 06.10. 2016 17:55 »
If buying one here and shipping to you would somehow help, let me know.

Richard L.
Plan on signing up for the world-wide 2020 DISTINGUISHED GENTLEMAN'S RIDEon September 27, 2020 (if it's not cancelled and we are free to move about by then). Watch website at https://www.gentlemansride.com for details.

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 3277
  • Karma: 47
Re: 1961 Super Rocket
« Reply #16 on: 06.10. 2016 18:16 »
Hi All,
Anji,
If all else is ok with the bearing size then it maybe possible to hone the bearing bore to size ??

Richard
I was trusting Anji's measurements, as I posted earlier,  2 thou is too tight

John

PS,
Bearings are a sore subject this week *sad2*
The spindle bearings on my milling machine had developed a little play, 0.0015in. or so
they of course are "specials", high precision angular contact type, matched as a pair
Trade price including tax just over €400  *eek* *eek* *eek*
Once ordered they took almost 10 days to arrive, I asked at the bearing shop about the special grease needed and was told they come pre packed
No they weren't *problem* so start looking for the Kluber NBU15, and then order that, so another wait until that arrives *pull hair out*


1961 Super Rocket
1963 RGS (ongoing)

Online KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 1471
  • Karma: 12
Re: 1961 Super Rocket
« Reply #17 on: 07.10. 2016 09:15 »
Hi Anji, I've spun a used crankshaft main bearing o.d. in a lathe and applied emery cloth to the I.d. In order to make a easy to trial bearing to get the crankshaft end float correct, so I guess the same could be done with your gearbox bearing?  albeit you have a bit more metal to remove....., I did not have too much trouble with I.d spinning, surprisingly.

It's a surprise you have to fettle a standard bearing to get it to fit, but having to fettle parts in order to get them to fit is rather too common  *work*
New Zealand

1956 A10 Golden Flash (1st finished project)

1949 B31 rigid “400cc hot rod” (2nd finished project, + favourite bike)

GL1800 Goldwing, well, the wife likes it

KTM 950 ADV, cos it’s 100% nuts

1952 Armstrong Siddeley Whitley for rainy days (with wife)

Offline anjimehra

  • Valued Contributor
  • ****
  • Join Date: Feb 2009
  • Posts: 343
  • Karma: 0
    • venture on wheels
Re: 1961 Super Rocket
« Reply #18 on: 12.10. 2016 16:27 »
If buying one here and shipping to you would somehow help, let me know.

Richard L.
Hi Richard
Did you get my message sent a few days back?
Anji