Author Topic: Offset on wheel  (Read 494 times)

Offline TT John

  • A's Best Friend
  • ***
  • Join Date: Jan 2012
  • Posts: 217
  • Karma: 2
Offset on wheel
« on: 10.10. 2016 08:30 »
Hello All

I have a 1956 plunger W B33 and am trying to find out what the offset is on the rear wheel, its a splined QD wheel, or where I can find out.

Many thanks in advance TTJohn
Good Advice
0
No reactions

Online morris

  • Wise & Enlightened
  • *
  • Join Date: Aug 2012
  • Posts: 1637
  • Karma: 26
  • Antwerp, Belgium
Re: Offset on wheel
« Reply #1 on: 19.11. 2016 20:31 »
Not sure if your B33 frame/wheels are like an A10 but if so, then the centre of rim 13 mm left of centre of hub should get your wheel centred to the frame

Edit; just noticed my typing error. Should be centre of rim 13 mm right of centre of hub
Good Advice
0
No reactions
'58 BSA A 10 SA
'52 BSA A 10 Plunger
'55 MORRIS ISIS
The world looks better from a motorbike
Belgium

Offline TT John

  • A's Best Friend
  • ***
  • Join Date: Jan 2012
  • Posts: 217
  • Karma: 2
Re: Offset on wheel
« Reply #2 on: 21.11. 2016 10:23 »
Morrris
I don't think its the same, as its a WM frame which is the same as the sprung M20 with tele's but thanks for your input.

TTJohn
Good Advice
0
No reactions