Author Topic: ammeter dial operation  (Read 765 times)

Offline hdawson

  • A's Good Friend
  • ***
  • Join Date: Feb 2016
  • Posts: 108
  • Karma: 0
ammeter dial operation
« on: 20.08. 2017 08:58 »
Hi all.
Another dumb question so please bear with me.
Both the BSA and the Matchy's ammeter dials bounce around while I am riding.
Is this normal?
With the engines not running , when I turn the lights on, they show the expected discharge.
But I would expect when I rev, that the ammeter needle would increase accordingly but it seems not to be.
What should I expect to see , at rest , and while being enthusiastic?
Cheers, Hadrian.





61 BSA Super Rocket (cafe).
51 Matchless G9 Clubman.
81 Suzuki GSX 750 ES.
02 Triumph Sprint.

Online Billybream

  • Resident Legend
  • *****
  • Join Date: Jan 2012
  • Posts: 639
  • Karma: 8
Re: ammeter dial operation
« Reply #1 on: 20.08. 2017 09:10 »
I think you will find most of them bounce around during riding, most probably down to the poor quality of pattern items these days.
1960 Super Rocket, owned since 1966, back on the road 2012 after being laid up for 29yrs.

Offline Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9810
  • Karma: 49
Re: ammeter dial operation
« Reply #2 on: 20.08. 2017 09:12 »
These little ammeters are hardly scientific instruments.

With headlight on, engine ticking over you should see a discharge but when you increase the engine revs you should see the ammeter move toward the nuetral position or a small positive charge.
If your battery is fully charged you should not see very much positive indication.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline hdawson

  • A's Good Friend
  • ***
  • Join Date: Feb 2016
  • Posts: 108
  • Karma: 0
Re: ammeter dial operation
« Reply #3 on: 20.08. 2017 09:35 »
Thanks for the feedback.
Spending too much time blatting on the modern Triumph whilst mulling on stuff I shouldn't.
 

61 BSA Super Rocket (cafe).
51 Matchless G9 Clubman.
81 Suzuki GSX 750 ES.
02 Triumph Sprint.

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1382
  • Karma: 29
Re: ammeter dial operation
« Reply #4 on: 20.08. 2017 09:52 »
The original Lucas ammeters, rather than the "new" lucas ones had a small adjuster on the underside which allowed you to increase pressure on the needle pivots and if done carefully can reduce the wild swings seen when bike being ridden.

It wont improve accuracy though!

First photo shows the screw on the type with needle above dial face.

Second photo shows type with needle below dial face, screw is under the sealing gunge.

Offline terryg

  • Resident Legend
  • *****
  • Join Date: Nov 2012
  • Posts: 565
  • Karma: 6
    • thecarshipenterprise
Re: ammeter dial operation
« Reply #5 on: 20.08. 2017 11:53 »
Try searching the forum for oil in the ammeter.  There have been several posts referring to how people used to fill with damping oil in an attempt to overcome the seemingly random indication issue.
I've not tried it myself but have been very tempted at times!
Terry
'57 'SR', '59 SR, '63 RGS

Online morris

  • Wise & Enlightened
  • *
  • Join Date: Aug 2012
  • Posts: 1763
  • Karma: 27
  • Antwerp, Belgium
Re: ammeter dial operation
« Reply #6 on: 20.08. 2017 12:25 »
Badly earthed dynamo can give the same symptoms.
'58 BSA A 10 SA
'52 BSA A 10 Plunger
'55 MORRIS ISIS
The world looks better from a motorbike
Belgium

Offline Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9810
  • Karma: 49
Re: ammeter dial operation
« Reply #7 on: 20.08. 2017 12:26 »
I have one of these gizmos shining into the side of my ammeter. Not really visible in daylight but handy in the dark. Available in 6 or 12v:
https://goo.gl/9WH5K6
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline Black Sheep

  • Wise & Enlightened
  • *
  • Join Date: Apr 2017
  • Posts: 1185
  • Karma: 8
    • Where black sheep live
Re: ammeter dial operation
« Reply #8 on: 20.08. 2017 14:18 »
I used to be troubled by bouncing ammeter needles and did indeed resort to filling ammeters with thin oil. However, since I switched to electronic voltage regulators (for both dynamo and alternator equipped bikes) the ammeters are models of good behaviour. Coincidence?
2 twins, 2 singles, lots of sheep

Offline Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9810
  • Karma: 49
Re: ammeter dial operation
« Reply #9 on: 20.08. 2017 15:57 »
...since I switched to electronic voltage regulators (for both dynamo and alternator equipped bikes) the ammeters are models of good behaviour. Coincidence?
I must say, I haven't noticed my ammeter, (modern replacement) needle bouncing around. I too have a DVR2 regulator, (highly recomended by the way).
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash