Author Topic: A10 carb troubles  (Read 500 times)

Offline rowanbsa

  • Moving Up
  • **
  • Join Date: Jan 2017
  • Posts: 14
  • Karma: 0
A10 carb troubles
« on: 30.01. 2017 23:39 »
I've just bought a 1953 Golden flash plunger. It has a mark 1 concentric carb fitted but it isn't set up correctly. Can anyone help me with regards to the correct set up for an A10 on this carb?
Good Advice
0
No reactions
53 A10 plunger

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8442
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: A10 carb troubles
« Reply #1 on: 31.01. 2017 19:25 »
G'day rowanbsa  *welcome*
What size 928, 930, 932 ?
General starting point would be 220 main, 25 pilot jet (1 1/2 turns out pilot screw), 3 1/2 slide, .106 needle jet and position 1(top groove) on the needle.
The concentrics are prone to warping if the bolts are done up too tight causing the slide to stick. Be gentle.

Now get over to Pictures, Stories and Intros and introduce yourself.
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7