Author Topic: 67-1549 fits on a A10 engine pre Unit 1951 to 1957  (Read 417 times)

Offline sixpak

  • Moving Up
  • **
  • Join Date: Jan 2017
  • Posts: 27
  • Karma: 0
Hello Peoples

does this head fits my engine for my golden flash A10?

1956 Engine?

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1021
  • Karma: 20
Re: 67-1549 fits on a A10 engine pre Unit 1951 to 1957
« Reply #1 on: 22.03. 2017 22:36 »
It will fit OK.

You will need head bolts, rocker box studs and rear sleeve nuts to suit the light alloy head.

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4540
  • Karma: 41
Re: 67-1549 fits on a A10 engine pre Unit 1951 to 1957
« Reply #2 on: 23.03. 2017 07:39 »

 If you have a Plunger motor with standard small fin barrels, it'll fit but look a bit funny.

 If you're not concerned about looks, no probs; I had to do it years ago to keep riding
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline terryg

  • Valued Contributor
  • ****
  • Join Date: Nov 2012
  • Posts: 463
  • Karma: 6
    • thecarshipenterprise
Re: 67-1549 fits on a A10 engine pre Unit 1951 to 1957
« Reply #3 on: 23.03. 2017 09:23 »
Remember you'll also need the thick, load spreading washers underneath the heads of the head bolts.
Terry
'57 'SR', '59 SR, '63 RGS