Hey guys!
I've been doing somewhat of a rebuild of my a10 during winter and have now changed oil pump to an SRM one.
As per instructions, it says to prime the oil pump before startup. The instructions read, "turn over engine gently using the kick-starter until a good amount of oil flows from the PRV housing".
My problem is this; no matter how much I turn over the engine, no oil flows from the PRV housing - when I look into the oil tank I can see oil returning to the tank. So my question is, has the oil pump now been primed properly since oil is in fact returning to the tank, or have I done something wrong in the install of the new pump?
I hope you can help!
Regards Andreas