Author Topic: Gearbox = coffee grinder  (Read 3843 times)

Online Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1928
  • Karma: 23
Re: Gearbox = coffee grinder
« Reply #15 on: 08.05. 2017 21:05 »
I'm not getting at you.  I once ran a Norton Jubilee gearbox out of oil.

It made yelping noises and seized.

Offline chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4015
  • Karma: 54
Re: Gearbox = coffee grinder
« Reply #16 on: 08.05. 2017 22:15 »
Hi All,
Commiserations GB  *sad2*

As my late Father would say "the man who never made a mistake, never made anything  *ex*"

John
1961 Super Rocket
1963 RGS (ongoing)

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: Gearbox = coffee grinder
« Reply #17 on: 08.05. 2017 22:44 »

 You gonna pull it apart before you take it to him? We (I) wanna look-see, you may(hopefully) be surprised how bad it's not.

 You should be able to get the lump out/in with the head&rocker box on; from memory I just needed to remove the inlet valve looksee cover and rear stud.
 Clutch and bits need to come off anyway, so nothing lost there.
Fairly sure I managed to reach & tighten the top G'box bolts with a socket on a 3/8" extension drive- I'll check on that.

 I checked my G-box oil the other week, and was surprised to find water droplets in the cover *eek*.. got hard-rained on a couple of times and I suspect it may have seeped down the kickstart shaft, drained it out (~350ml) and replaced it, but still need to pull the end-cover for a proper look.

 Good luck with it
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 6361
  • Karma: 55
Re: Gearbox = coffee grinder
« Reply #18 on: 08.05. 2017 23:01 »
I'm not getting at you.  I once ran a Norton Jubilee gearbox out of oil.

I made yelping noises and seized.

I don't blame you. ;)

Offline kiwipom

  • Resident Legend
  • *****
  • Join Date: Jan 2011
  • Posts: 745
  • Karma: 8
Re: Gearbox = coffee grinder
« Reply #19 on: 09.05. 2017 01:07 »
hi guys, Bob Macintyre lost his gearbox oil and his life, so sad, cheers, Hope I haven't said the wrong thing, morbid I know
A10.G.Flash(cafe racer)Honda 250 vtr. Yamaha Virago XV920.

War! what is it good for?Absolutely nothing, Edwin Star.
NewZealand

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9812
  • Karma: 49
Re: Gearbox = coffee grinder
« Reply #20 on: 09.05. 2017 08:39 »
...Bob Macintyre lost his gearbox oil and his life...
I was worrying that my gearbox might seize on the way home from last weekends camp!
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: Gearbox = coffee grinder
« Reply #21 on: 09.05. 2017 09:05 »

 
Quote
Over the last week I've become aware of second and third gear becoming whiny and now grindy on my Plunger A10.
  All smart in retrospect, but before doing a trip.?... *roll*
 

Quote
.... Oh, I must have forgotten that I used that new invisible oil cos I can't see anything dripping into the tray!

DOH!   ::hh::

 I love that; don't tell us it was on special so you bought a truckload *eek*.....
  ...a bit like my 'invisible concrete' story... back in '99, I was in 'Wozza-World' (Mullbin), and we were pouring a industrial driveway in the Westurbs (Laverton), dumped a few cubes and the truck (Agi/lorry), was almost empty.. dumbass knowall Anji (ring-in boss) had the truck move; I said " Anj(ello), the trucks empty"...he said "no, there's a good half cube in there'  *dunno*

 So after a bit of muckin' round, got the truck in place and spun the bowl and a few stones rolled out and Anj says (he was a totalfurquit) "spin the bowl-spin the bowl "....I said " Anj, the bowls spinning- the truck's empty.." He said " no there's a good half metre in there- so I said " what a half metre of Invisible Concrete *????* "    He looked at me weirdlike  *eek*- was one of those 'yea had to be there' situations


 

 
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9812
  • Karma: 49
Re: Gearbox = coffee grinder
« Reply #22 on: 09.05. 2017 10:49 »
You gonna pull it apart before you take it to him? We (I) wanna look-see, you may(hopefully) be surprised how bad it's not.

No sorry; I'm wearing good clothes today so I'm not inclined to get oily. If Gearbox Man strips the box while I'm there I'll take photos.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Online Topdad

  • bob hebdon
  • Wise & Enlightened
  • *
  • Join Date: May 2011
  • Posts: 2592
  • Karma: 36
  • l
Re: Gearbox = coffee grinder
« Reply #23 on: 09.05. 2017 12:06 »
Obviously you need to check everything so it will be refurbed back to good but for future info (and to satisfy my aged memory ) isn't it possible, with the clutch off to pull all the innards out for examination and to change things like dogs etc. Reason is when I had mine (plunger ) (Shit was it really 50 yrs ago i owned that bike !! ) I can remember reassembling the g/box on the road outside our old shop ,can't remember why ( def not for fun )  but sure it happened .
" rules are made for the guidance of wise men and the blind obediance of fools"
United Kingdom

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9812
  • Karma: 49
Re: Gearbox = coffee grinder
« Reply #24 on: 09.05. 2017 12:29 »
...isn't it possible, with the clutch off to pull all the innards out for examination and to change things...

Yes Topdad, it would be possible to strip the box in situ but I was advised by a wise man that my problem was probably the drive side layshaft blind bush and that cannot be removed without access to the back of the box where it's masked by the primary chaincase. Also, if the sprocket seal, (that I stupidly didn't change when I recently changed the GB sprocket) is the cause of my oil loss that cannot be accessed in situ.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Online Topdad

  • bob hebdon
  • Wise & Enlightened
  • *
  • Join Date: May 2011
  • Posts: 2592
  • Karma: 36
  • l
Re: Gearbox = coffee grinder
« Reply #25 on: 09.05. 2017 12:37 »
Thanks GB memory still working ---result  but obviously not a suitable option in this case , by the way could you advise how much your charges for grinding/rebushing the layshaft, I've a complete box that I'm thinking of refurbing always used SRM for that job but always looking for options . That will be after I've sorted my other box out on the bike !!
" rules are made for the guidance of wise men and the blind obediance of fools"
United Kingdom

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9812
  • Karma: 49
Re: Gearbox = coffee grinder
« Reply #26 on: 09.05. 2017 12:39 »
I will update when I have more information.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9812
  • Karma: 49
Re: Gearbox = coffee grinder
« Reply #27 on: 09.05. 2017 23:41 »
Gearbox Man will strip the box tomorrow. I may not be without Motorcycle for very long!  *smile*
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9812
  • Karma: 49
Re: Gearbox = coffee grinder
« Reply #28 on: 10.05. 2017 19:03 »
My gearbox is ready to pick up!  *smile*
Richard Clamp said the layshaft and bush were shot as expected, plus he said the box had an incorrect selector shaft(?) it was for the swinging arm box which surprised me as I assumed the gearbox was all original. He also changed the mainshaft seal, clutch pushrod and its operating lever. I'm going over there tomorrow to pay him 200GBP  *doh* and thank him for doing it so speedily.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 6361
  • Karma: 55
Re: Gearbox = coffee grinder
« Reply #29 on: 10.05. 2017 19:06 »
Sounds like a pretty good deal.

Richard L.