Author Topic: Thread Type for Restoring Amal Monobloc JET BLOCK?  (Read 252 times)

Offline Peter Gee

  • Valued Contributor
  • ****
  • Join Date: Apr 2015
  • Posts: 268
  • Karma: 1
Hi, am needing to chase the threads on my type 89 MONOBLOC  Jet Block ( the one the main jet holder screws into) but darned if I can imagine what tap they used, and they are not replying from AMAL itself. .the nearest size I seem to get is 19TPI measured on the main jet holder....which would be BSP thread, confusingly there are TWO BSP 19 TPI in tap list named 1/4 and 3/8 . 7/16 x 18 BSF seems close but not correct. The actual thred of the JETBLOCK seems between the diameters of  the two 19TPI  BSP taps..in fact I get about 0.430  dia when measuring the Jet Holder itself, which is neither one --1/4 BSP x 19 is too small, or the other 3/8 BSP x 18 is too large at over 0.500.... Anyone know?
Good Advice
0
No reactions