Author Topic: Petcock thread sealant  (Read 1422 times)

Online scotty

  • Resident Legend
  • *****
  • Join Date: Aug 2008
  • Posts: 557
  • Karma: 8
Petcock thread sealant
« on: 25.08. 2017 03:08 »
What sealant can be used on petcock threads on the gas/petrol tank ?

S

Scotty

Current liabilities:
'56 A10 Dark Flash
'54 B33
‘74 Berlin Bomber R75-6

Online orabanda

  • Wise & Enlightened
  • *
  • Join Date: Nov 2008
  • Posts: 1180
  • Karma: 24
Re: Petcock thread sealant
« Reply #1 on: 25.08. 2017 03:20 »
Loctite 569

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3192
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: Petcock thread sealant
« Reply #2 on: 25.08. 2017 09:11 »
Using Loctite 243 (blue) with success.


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Online KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 1940
  • Karma: 17
Re: Petcock thread sealant
« Reply #3 on: 25.08. 2017 09:37 »
What sealant can be used on petcock threads on the gas/petrol tank ?

S

PTFE tape is the obvious solution isn't it? *dunno* It's designed for sealing threads  *lol*

It's what I use anyway.
New Zealand

1956 A10 Golden Flash  (1st finished project)
1949 B31 rigid “400cc”  (2nd finished project)
1968 B44 Victor Special (3rd finished project)
2001 GL1800 Goldwing, well, the wife likes it
2009 KTM 990 Adventure, cos it’s 100% nuts

Online Rex

  • Wise & Enlightened
  • *
  • Join Date: Apr 2017
  • Posts: 1566
  • Karma: 7
Re: Petcock thread sealant
« Reply #4 on: 25.08. 2017 09:45 »
Yep, PTFE tape every time. Quick and no mess, what's not to like?

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1396
  • Karma: 29
Re: Petcock thread sealant
« Reply #5 on: 25.08. 2017 10:42 »
Always PTFE tape. Seal it with a loctite can make removal difficult and too much force shoud be avoided because of the thin metal of the tank.

Offline RoyC

  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1179
  • Karma: 10
Re: Petcock thread sealant
« Reply #6 on: 25.08. 2017 10:50 »
What sealant can be used on petcock threads on the gas/petrol tank ?

S


PTFE tape is the obvious solution isn't it? *dunno* It's designed for sealing threads  *lol*

It's what I use anyway.
Same here.
Roy.
My bike is a 1958 A7SS
Staffordshire UK

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3192
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: Petcock thread sealant
« Reply #7 on: 25.08. 2017 10:52 »
Always PTFE tape. Seal it with a loctite can make removal difficult and too much force shoud be avoided because of the thin metal of the tank.

Never used ptfe, but it obviously works well. If using loctite, right type and right amount.

About the 243, it's a soft one, needs just a small drop or two on parts of threads to secure and stop leak, & will unscrew without any real force.

Got 3 bottles of Loctite for different use, green (hard), red (medium), blue (soft).


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline mikeb

  • Resident Legend
  • *****
  • Join Date: Dec 2014
  • Posts: 813
  • Karma: 13
Re: Petcock thread sealant
« Reply #8 on: 25.08. 2017 11:41 »
there's a yellow version of PTFE tape for gas fittings. I got to thinking it was more resilient to solvents (petrol) and have used that
New Zealand
'61 Super Rocket  - '47 B33 -  '21 Triumph Speed Triple RS

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1396
  • Karma: 29
Re: Petcock thread sealant
« Reply #9 on: 25.08. 2017 11:48 »
Also use a Dowty seal washer in tap to tank joint.

Online scotty

  • Resident Legend
  • *****
  • Join Date: Aug 2008
  • Posts: 557
  • Karma: 8
Re: Petcock thread sealant
« Reply #10 on: 25.08. 2017 14:48 »
Thanks for the suggestions  *smile*

S


Scotty

Current liabilities:
'56 A10 Dark Flash
'54 B33
‘74 Berlin Bomber R75-6

Online scotty

  • Resident Legend
  • *****
  • Join Date: Aug 2008
  • Posts: 557
  • Karma: 8
Re: Petcock thread sealant
« Reply #11 on: 25.08. 2017 21:37 »
Going to try this Petro Tape.

Looks, smells and feels like PTFE tape but its thicker ( 3 mil ) and, according to the corporate jabberwocky, it's made from "virgin PTFE"

I wonder how the more sexually experienced tape performs ?

S


Scotty

Current liabilities:
'56 A10 Dark Flash
'54 B33
‘74 Berlin Bomber R75-6

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9839
  • Karma: 49
Re: Petcock thread sealant
« Reply #12 on: 25.08. 2017 22:35 »
....
I see you have one of them new fangled Wireless sets there.
This is a picture of the radio I grew up with. Loved listening to this in the 1950's before we had a TV.

I've put a modern amplifier inside the case and added a Bluetooth dongle so I can send audio files to it. It's great to send a recording of say 'Hancocks Half Hour' to the radio.

If you are interested: http://www.bbc.co.uk/programmes/b009t2ld/episodes/player
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Online scotty

  • Resident Legend
  • *****
  • Join Date: Aug 2008
  • Posts: 557
  • Karma: 8
Re: Petcock thread sealant
« Reply #13 on: 25.08. 2017 23:28 »
Petro Tape seems to be sealing good

and yes Greybeard I trawl the megahertz with my trusty Philco shortwave radio and Grundig long wave radio.
Drives the old trout nuts as I listen to static aunty beebs shipping forecast.
Dogger, Fisher, Germant Bight   *smile*

S

Scotty

Current liabilities:
'56 A10 Dark Flash
'54 B33
‘74 Berlin Bomber R75-6