« previous next »
Pages: [1]   Go Down

Author Topic: Mag shims  (Read 605 times)

Online bikerboy

  • Valued Contributor
  • ****
  • Join Date: Dec 2011
  • Posts: 443
  • Karma: 4
Mag shims
« on: 16.07. 2017 23:41 »
Anyone know where I can buy mag shims? I am talking about the big square ones between the body and the points housing. Its also for a K2FC competition mag which is slightly more square than the normal mag body.
Logged

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: Mag shims
« Reply #1 on: 17.07. 2017 04:10 »
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Online bikerboy

  • Valued Contributor
  • ****
  • Join Date: Dec 2011
  • Posts: 443
  • Karma: 4
Re: Mag shims
« Reply #2 on: 18.07. 2017 00:30 »
Thanks Dutch he has every part listed except the one I want  *smile*

He probably makes his own to suit which is where I think I am going to end up
Logged

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: Mag shims
« Reply #3 on: 18.07. 2017 01:00 »

 Bugga  *conf*
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline Viking

  • A's Good Friend
  • ***
  • Join Date: May 2015
  • Posts: 128
  • Karma: 2
Re: Mag shims
« Reply #4 on: 04.09. 2017 20:55 »
http://www.brightsparkmagnetos.com/downloads/index.htm

Make Them your self..

Or dragonfly have them.
Logged

Online terryg

  • Resident Legend
  • *****
  • Join Date: Nov 2012
  • Posts: 565
  • Karma: 6
    • thecarshipenterprise
Re: Mag shims
« Reply #5 on: 05.09. 2017 20:26 »
Maybe try Andrew at Priory Magnetos (beezermacc). I think he may be back to work now, as he's posted recently on the forum.
Logged
Terry
'57 'SR', '59 SR, '63 RGS
Pages: [1]   Go Up
« previous next »