Author Topic: A10 Rocker Feed Pipe  (Read 647 times)

Offline bl**dydrivers

  • Valued Contributor
  • ****
  • Join Date: Oct 2008
  • Posts: 258
  • Karma: 1
A10 Rocker Feed Pipe
« on: 03.01. 2018 22:46 »
The type I need is the later type and all I can find using the part number 42-0139 is the lower section.

Can I use the older version 42-0048, cut it and use the required lower section?

Or is the top section different?

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10780
  • Karma: 130
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: A10 Rocker Feed Pipe
« Reply #1 on: 04.01. 2018 00:03 »
The only difference is the later is cut and a rubber hose fitted. The top banjos are the same.
https://www.draganfly.co.uk/index.php/bsa/bsa/a710--b3133--c101112--m202133/category/867-pre-unit-a-group
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline bl**dydrivers

  • Valued Contributor
  • ****
  • Join Date: Oct 2008
  • Posts: 258
  • Karma: 1
Re: A10 Rocker Feed Pipe
« Reply #2 on: 04.01. 2018 00:46 »
Is the bottom section also the same?

The only difference is the later is cut and a rubber hose fitted. The top banjos are the same.
https://www.draganfly.co.uk/index.php/bsa/bsa/a710--b3133--c101112--m202133/category/867-pre-unit-a-group
Cheers

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10780
  • Karma: 130
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: A10 Rocker Feed Pipe
« Reply #3 on: 04.01. 2018 02:33 »
Yes
Same oil tank fitting.
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7