Author Topic: Gear change shaft bush  (Read 348 times)

Offline tlmark

  • A's Best Friend
  • ***
  • Join Date: Aug 2016
  • Posts: 198
  • Karma: 2
  • Maidstone, Kent
Gear change shaft bush
« on: 05.01. 2018 11:45 »
Hi guys I’ve just bought a “new” outer gear box cover, and I’m installing new bushes in both kickstart and gear shift. Kick start was fine. But the new gear shift bush has a flange. The one already installed doesn’t
Is that right? Or is this the wrong bush?

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1021
  • Karma: 20
Re: Gear change shaft bush
« Reply #1 on: 05.01. 2018 13:20 »
Depends on whether your bike is plunger or swinging arm.

 The plunger and rigid boxes use a non flanged bush in the outer cover part 67 3140.

The swinging arm boxes use a flanged bush 67 3353.

Both use a flanged bush in the inner cover part 67 3170.

Offline tlmark

  • A's Best Friend
  • ***
  • Join Date: Aug 2016
  • Posts: 198
  • Karma: 2
  • Maidstone, Kent
Re: Gear change shaft bush
« Reply #2 on: 05.01. 2018 14:41 »
Julian that’s perfect thank you,  *smile*

I shall go ahead and remove the old and fit then new one.