Author Topic: Britsh bike extractor tool. Can you help me identify this tool MCE TSB8  (Read 607 times)

Offline Graham367

  • Active
  • *
  • Join Date: Jun 2018
  • Posts: 1
  • Karma: 0
I have come across a motorcycle extractor tool in my old tool box and have reason to beleave it is a clutch extrator tool for either a BSA or Truimph not sure.
The markings on the tool are MCE TSB8.
I would be most pleased if any one could identify this for me.
Many thanks
Graham
Good Advice
0
No reactions

Online berger

  • Wise & Enlightened
  • *
  • Join Date: Nov 2017
  • Posts: 1339
  • Karma: 7
  • keith.chesterfield uk 500sscafe.norbsa project
i think trump clutch hub *whistle*
Good Advice
0
No reactions

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 5202
  • Karma: 50
Graham,

Welcome to the forum.  *welcome* Odd that your first post is to ask a question about an old tool. Can you get over to "Pictures, Stoies and Introductions" and tell us a bit about yourself and interest in A7/A10 BSAs?

Richard L.
Good Advice
0
No reactions
Plan on signing up for the world-wide 2020 DISTINGUISHED GENTLEMAN'S RIDEon September 27, 2020. This year it's a solo or pillion ride in dapper attire. Watch website at https://www.gentlemansride.com for details.


Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 6433
  • Karma: 36
Graham,

Welcome to the forum.  *welcome* Odd that your first post is to ask a question about an old tool. Can you get over to "Pictures, Stoies and Introductions" and tell us a bit about yourself and interest in A7/A10 BSAs?

Richard L.
Us Old Tools are quite nosey!
Good Advice
0
No reactions

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8478
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
G'day Graham.
Could be a cam pinion extractor or unit construction clutch hub puller. https://tinyurl.com/yb64qxlf
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Offline Sav

  • A's Best Friend
  • ***
  • Join Date: Jul 2011
  • Posts: 145
  • Karma: 2
  • VMCC Men of Kent and BSAOC member
    • Ashley, Ripple & Studdal Enthusiasts
Could be one of these as attached?? though mine has MOA P110 on it

Got one in the odds 'n sods pullers box, can't remember what for though! 


Possibly I've used for:

An A group mag pinion puller, but I don't think so as I've another that looks more like that

More likely a clutch hub extractor, either for my A group four spring clutch or my pre war single spring clutch on my M23



Good Advice
0
No reactions
1961 A10SR, spent a fortune at SRM
1961 A7SS, finally the right green
2011 New addition 1937 Empire Star, twin port, high pipes. Turned out to be the most unreliable bike I have handled.
2017 finally found the liner/barrel were flexing and causing all the overheating/nipping up. Early B33 barrel fitted and it's reliable at last!

Online berger

  • Wise & Enlightened
  • *
  • Join Date: Nov 2017
  • Posts: 1339
  • Karma: 7
  • keith.chesterfield uk 500sscafe.norbsa project
no mate mag pinion puller smaller , just tried mine , I recon triumph hub as muskrat has found the link
Good Advice
0
No reactions

Offline Colsbeeza

  • A's Best Friend
  • ***
  • Join Date: Aug 2015
  • Posts: 241
  • Karma: 2
Graham, If you could measure the thread diameter and TPI it should be easier to identify.
Col
Good Advice
0
No reactions
Colsbeeza
Australia

Online Butch (cb)

  • Wise & Enlightened
  • *
  • Join Date: Aug 2010
  • Posts: 1563
  • Karma: 14
Good Advice
0
No reactions
Warning - observations made by this member have a 93% unreliability rating.

Of Bikes; various, including ...
'58 Iron Head Flash Bitza


Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 6433
  • Karma: 36
I think I have something like this in my box of odds-n-sods. I probably bought it when I had a Triumph Trailblazer, (or maybe the Triumph 3TA)
Good Advice
0
No reactions