Author Topic: Any ideas why I have this screw in my inner timing case?  (Read 790 times)

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Posts: 4969
  • Karma: 27
My bike has a tiny cheese head screw, (hole must be a couple of mm) on top of the inner timing case directly above the advance & retard unit. I've never figured what it's doing there. Any ideas?

Online beezermacc

  • Resident Legend
  • *****
  • Posts: 852
  • Karma: 33
  • Not for the purist!
    • Priory Magnetos Ltd.
Can't think why anybody would do this, it's obviously a 'mod' for some unknown reason.
Priory Magnetos Ltd - A10 spares, magneto and dynamo refurbs. www.priorymagnetos.co.uk

Online Peter in Aus

  • Valued Contributor
  • ****
  • Posts: 294
  • Karma: 1
  • South West, West Australia
My bike has a tiny cheese head screw, (hole must be a couple of mm) on top of the inner timing case directly above the advance & retard unit. I've never figured what it's doing there. Any ideas?
A pic would help ;)

Busselton West Australia
49 A7 longstroke
58 A10  SA

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Posts: 4969
  • Karma: 27
My bike has a tiny cheese head screw, (hole must be a couple of mm) on top of the inner timing case directly above the advance & retard unit. I've never figured what it's doing there. Any ideas?
A pic would help ;)
I'm away from home at the moment. I'll post a pic of the screw later.

Online duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Posts: 4209
  • Karma: 39

 
Quote
I'm away from home at the moment. I'll post a pic of the screw later.

 Without the bike ? go home and take a pic- now......  *bash*

 Someone posted a similar thing a few days ago, like it was a hole for adding lubricant or checking chain tension or some other hair-brained idea....
 
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Posts: 4969
  • Karma: 27
The hole is tiny, plus, it's above the ATD.

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Posts: 4820
  • Karma: 45
Another possiblity for screwing in the lifting eye for the crane.

Richard L.
Plan on signing up for the world-wide 2017 DISTINGUISHED GENTLEMAN'S RIDE on September 30, 2018. Watch website at https://www.gentlemansride.com for details.

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Posts: 4969
  • Karma: 27
Maybe someone drilled a pilot hole and decided not to proceed with whatever they were going to do so tapped a thread and put a something BA screw in there.

Online kiwipom

  • Resident Legend
  • *****
  • Posts: 744
  • Karma: 8
hi guys, (Another possibility for screwing in the lifting eye for the crane) love your sense of humor, cheers
A10.G.Flash(cafe racer)Honda 250 vtr. Yamaha Virago XV920.

War! what is it good for?Absolutely nothing, Edwin Star.
NewZealand

Offline stev60

  • Moving Up
  • **
  • Posts: 63
  • Karma: 0
The harebrained  idea was mine, its above the dynamo chain, just to squirt chain lube now and then, not to check tension.

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Posts: 4969
  • Karma: 27
Re: Any ideas why I have this screw in my inner timing case?
« Reply #10 on: 28.06. 2018 08:35 »
The harebrained  idea was mine, its above the dynamo chain, just to squirt chain lube now and then, not to check tension.
OK, a reason, but my little 'ole doesn't appear to have a purpose.

Online WozzA

  • Wise & Enlightened
  • *
  • Posts: 1238
  • Karma: 16
  • Melbourne Australia
Re: Any ideas why I have this screw in my inner timing case?
« Reply #11 on: 28.06. 2018 10:16 »
The harebrained  idea was mine, its above the dynamo chain, just to squirt chain lube now and then, not to check tension.
OK, a reason, but my little 'ole doesn't appear to have a purpose.
*whistle*  Does it have hair around it?   *dribble*
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"

Online bsa-bill

  • Wise & Enlightened
  • *
  • Posts: 5215
  • Karma: 60
Re: Any ideas why I have this screw in my inner timing case?
« Reply #12 on: 28.06. 2018 10:25 »

Alloy worm - get a tin of stuff from Rentakill *smile*
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline Topdad

  • bob hebdon
  • Wise & Enlightened
  • *
  • Posts: 2150
  • Karma: 32
  • l
Re: Any ideas why I have this screw in my inner timing case?
« Reply #13 on: 28.06. 2018 10:29 »

Total likes: 368
Karma: 15
[Give Appreciation]
Melbourne Australia
Yahoo Instant Messenger - woz45
View Profile  Personal Message (Online)

« Reply #11 on: Today at 10:16 »
Quote
Quote from: Greybeard on Today at 08:35
Quote from: stev60 on Today at 02:20

OK, a reason, but my little 'ole doesn't appear to have a purpose.
*whistle*  Does it have hair around it?   *dribble*
 *yeah*
" rules are made for the guidance of wise men and the blind obediance of fools"
United Kingdom

Offline bikerbob

  • Valued Contributor
  • ****
  • Posts: 456
  • Karma: 7
Re: Any ideas why I have this screw in my inner timing case?
« Reply #14 on: 28.06. 2018 17:36 »
According to the lubrication chart it is recommended to lubricate the auto advance and retard unit every 2000 miles maybe a previous owner decided that instead of taking off the timing cover to lubricate  the unit he drilled a hole in the cover allowing easy lubrication without removing the timing cover. I have found that the unit gets enough lubrication without recourse to  removing the timing cover every 2000 miles.