£SRM?

[Greybeard]

Thank you guys. I'm interested to hear opinions on the end-feed conversion.

[BSA_54A10]

Total waste of time & money on A 7's & 10's unless you are running them at 9000 + rpm with 15:1 pistons

[JulianS]

Had my A10 SRM converted in 1984. Done many many miles since then including commuting. Would not want to go back to struggling with a bush, reaming and shims. Works perfectly. No crank end float to set, better oil feed to the big ends, no pressure drop when the bush wears.

[Billybream]

It's not on my wish list, I think the conversion was developed for racing by Devimead.
The standard set up has been well proved for over sixty years.

[Rex]

God-knows how many thousands of A's did God knows how many miles, day in day out under often arduous conditions with crappy oil and all on the standard set up.
A couple of thousand summer miles gently ridden isn't going to over-tax it now.

[Worty]

Tend to agree.  Unless you're going nuts with performance and mileage, the standard set up with regular oil changes should be more than fine.