Author Topic: Clutch Conversion  (Read 4211 times)

Offline broom34

  • Moving Up
  • **
  • Join Date: Aug 2008
  • Posts: 35
  • Karma: 0
Clutch Conversion
« on: 18.07. 2009 19:08 »
Hi
    I'm just in the process of rebuilding an A10 Gold Flash Plunger 1957, and I want to replace the old clutch with a new belt driven one , now my question is, are there any conversions for the A10 plunger , or would a Triumph conversion kit fit OK .
     
     Anyone out there that can advise me please

Richard

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10763
  • Karma: 130
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Clutch Conversion
« Reply #1 on: 18.07. 2009 22:26 »
G'day Richard, I don't know for sure but try Lytedrive in Melbourne Oz, John Scarri. ltyedrive@optusnet.com.au . I am about to order one for A10 s/a $1000 AU diaphram clutch with sealed bearing can run wet or dry.
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline rocket man

  • Valued Contributor
  • ****
  • Join Date: Mar 2009
  • Posts: 466
  • Karma: 2
Re: Clutch Conversion
« Reply #2 on: 19.07. 2009 00:21 »
hi mate i had mine done and its a sweet ride now go it from srm
heres a pic

Offline broom34

  • Moving Up
  • **
  • Join Date: Aug 2008
  • Posts: 35
  • Karma: 0
Re: Clutch Conversion
« Reply #3 on: 19.07. 2009 10:16 »
Hi Muskrat & Rocketman
                               Thanks for your replys I will be sending e-mails off to your suggested sites for more information  *smiley4*

Richard

Offline RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 6362
  • Karma: 55
Re: Clutch Conversion
« Reply #4 on: 19.07. 2009 14:42 »
As one with no experience of different clutches on given bikes, I can't help but wonder what difference I would note between my 6-spring s/a clutch (adjusted quite well, I believe) and other available types. Somehow, I am confused why a $1000 AU (491 GBP) clutch could be so much better than a 260 GBP 4-spring clutch from SRM or, even, my very inexpensive 6-spring, which seems to do everything I want.

As the expression goes here, can somebody "talk me down?"

Richard L.

Offline MikeN

  • A's Good Friend
  • ***
  • Join Date: Mar 2009
  • Posts: 220
  • Karma: 2
Re: Clutch Conversion
« Reply #5 on: 19.07. 2009 15:53 »
As one with no experience of different clutches on given bikes, I can't help but wonder what difference I would note between my 6-spring s/a clutch (adjusted quite well, I believe) and other available types. Somehow, I am confused why a $1000 AU (491 GBP) clutch could be so much better than a 260 GBP 4-spring clutch from SRM or, even, my very inexpensive 6-spring, which seems to do everything I want.

As the expression goes here, can somebody "talk me down?"

Richard L.
Richard,
 The reason Ive been using a belt drive on my last 2 bikes  for the last 10 years is ,
a) both bikes needed new clutches,
b)once set up you never have to adjust them as the belt doesnt stretch.
c) I run them dry so that eiminates a potential oil leak .
d) runs much quieter than standard with no clatter from the l/h side.
e) The kits I use (Tony Hayward ). use friction material that allows you to back off the springs .In conjunction with a nylon lined clutch cable you get 2 finger operation which is very pleasant and impresses other bike owners no end.
f) Apparently ,(and Im not sure about this one),a belt absorbs less power than a chain .

Mike

Offline rocket man

  • Valued Contributor
  • ****
  • Join Date: Mar 2009
  • Posts: 466
  • Karma: 2
Re: Clutch Conversion
« Reply #6 on: 19.07. 2009 16:49 »
thats also why harley davidsons have a belt drive rear wheel
it absorbs a lot more than a chain and chains stretch a lot more
and a lot ove harley custom bikes have belt primery drives in  *smile*

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10763
  • Karma: 130
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Clutch Conversion
« Reply #7 on: 19.07. 2009 22:05 »
Hit the nail on the head Mike. It's down to preference as to which one to use. I prefer the diaphram with less parts. One thing though Richard, I think the mainshaft is different on the semi unit to the s/a. It's been a long time (8 years, 15000 miles)) since I looked at my std 6 spring clutch in my '51 plunger !! See even Richard L is right.
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Online trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3185
  • Karma: 71
Re: Clutch Conversion
« Reply #8 on: 19.07. 2009 22:30 »
It may not be easy getting a different clutch for a plunger A7/A10 as there is not much room in there.
Trev.

Offline coater87

  • Wise & Enlightened
  • *
  • Join Date: Jul 2008
  • Posts: 1204
  • Karma: 6
Re: Clutch Conversion
« Reply #9 on: 19.07. 2009 22:46 »
Guys,

 I have seen other belt drive clutches for our bikes, does this one require "ventilation" to run correctly? One conversion I have seen had odd shapes and what-not cut into the primary case. I asked the owner why in the world he would do that (its not like it was a full-on chopper), and he told me you must do this with his belt drive or everything will over heat big time.


 Lee

 
Central Wisconsin in the U.S.

Offline rocket man

  • Valued Contributor
  • ****
  • Join Date: Mar 2009
  • Posts: 466
  • Karma: 2
Re: Clutch Conversion
« Reply #10 on: 19.07. 2009 23:41 »
mine was done by srm with a normal outer primery case
with no cut outs and i have had no problems

Offline MikeN

  • A's Good Friend
  • ***
  • Join Date: Mar 2009
  • Posts: 220
  • Karma: 2
Re: Clutch Conversion
« Reply #11 on: 20.07. 2009 09:18 »
No vents in mine either.
Heres a thought though.Can you fit a belt drive to rigid or plunger semi-unit engine?how  would you tension it?
MN

Offline rocket man

  • Valued Contributor
  • ****
  • Join Date: Mar 2009
  • Posts: 466
  • Karma: 2
Re: Clutch Conversion
« Reply #12 on: 20.07. 2009 10:34 »
thats a good point i had a triumph unit with a belt drive on it
and it was on before i got the bike mybe belt drives dont need to be ajusted
like a chain does like i said a chain streches a lot more than a belt does
so if the belt is the right tension when you put it on it wont need ajustment
so it could be used on a unit engine bsa

Offline alanp

  • Plymouth, Devon
  • Valued Contributor
  • ****
  • Join Date: Jul 2009
  • Posts: 473
  • Karma: 7
Re: Clutch Conversion
« Reply #13 on: 27.07. 2009 20:52 »
Ref the ventilation point with belt drive primary drives ......I ran a Goldie with a Bob Newby belt drive and left off the sliding oil seal device normally fitted behind the clutch which provides ventilation. Ran with no probems whatsoever and still problem free after 3 years.
Member of the 'Last of the Summer Wine Club - Jennycliff'.