Author Topic: Smoking  (Read 953 times)

Online edboy

  • Valued Contributor
  • ****
  • Join Date: Oct 2012
  • Posts: 422
  • Karma: 3
Re: Smoking
« Reply #30 on: 16.11. 2018 19:16 »
i would second that. remove the exhaust and try to find where the oil originates. guides or piston.
i believe the old hepolite piston rings are tapered and if fitted upside down pushes oil up the bore rather than down it. i would check/measure the bore ring gaps at the 3 possitions in the bore. top , middle and top. however the main suspect would be a loose or scored valve guide. possible cracked head if ally.

Online Colsbeeza

  • A's Best Friend
  • ***
  • Join Date: Aug 2015
  • Posts: 191
  • Karma: 2
Re: Smoking
« Reply #31 on: 18.11. 2018 11:38 »
Thanks John CL, That gives me a couple of things to try.
To recap, I have recently re-honed the cylinders, reconditioned the head - new guides and valves done by a very reputable workshop and head crack-tested. However, that doesn't necessarily solve the situation if there is a score in the head guide bore so that is still a possibility. The guy used a sealant - not sure what but used to help bed in guides, so should have sealed any score one would think.
Edboy, I also replaced the rings with Hepolite from SRM. Unlike my unmarked originals, the top of the rings were marked with a "T", so I can eliminate that possibility. As the bore had only 40 miles from the new rebore, there was no difference in ring gap at any position in the bores.
First step now will be to remove the exhaust pipes and have a decent look for oil sources. I'll plod along and get back to you before too long.
Cheers Col
Colsbeeza
Australia