Author Topic: E3L dynamo end cap wanted  (Read 391 times)

Offline pato08

  • A's Best Friend
  • ***
  • Posts: 210
  • Karma: 0
  • A Work In Progress
E3L dynamo end cap wanted
« on: 04.01. 2019 08:22 »
Looking to purchase a pressed steel end cap for a E3L dynamo
1957 Plunger, one of the very rare collector's items ;-)
Australia

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Posts: 2807
  • Karma: 66
Re: E3L dynamo end cap
« Reply #1 on: 04.01. 2019 23:33 »
Try Cob Smith.
If he can't help you I may be able to.

Offline pato08

  • A's Best Friend
  • ***
  • Posts: 210
  • Karma: 0
  • A Work In Progress
Re: E3L dynamo end cap
« Reply #2 on: 05.01. 2019 21:09 »
Thanks trevinoz, I presume you mean "Cobs British Bike Spares" ?
there is also swap meet in Goulbourn on the 20th. I'm going to have a look for a few bit I still need.
I'll contact Cob and see how I go.
1957 Plunger, one of the very rare collector's items ;-)
Australia

Offline a

  • Valued Contributor
  • ****
  • Posts: 274
  • Karma: 4
Re: E3L dynamo end cap
« Reply #3 on: 15.01. 2019 05:32 »
We have these Genuine NOS $55.00 or Used $38.50 Plus Post. https://mikesclassiccyclespares.com/product/lu200924/

And yes Mike will be at Goulburn Swap Meet If you want him to take one there let us know.


Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Posts: 2807
  • Karma: 66
Re: E3L dynamo end cap
« Reply #4 on: 15.01. 2019 19:50 »
Pato, Cob had a heap of them a while back.
I got 5 or 6 from him at a good price.
All new.
Give him a call but make sure it's after his preferred time.

Offline pato08

  • A's Best Friend
  • ***
  • Posts: 210
  • Karma: 0
  • A Work In Progress
Re: E3L dynamo end cap
« Reply #5 on: 15.01. 2019 20:58 »
We have these Genuine NOS $55.00 or Used $38.50 Plus Post. https://mikesclassiccyclespares.com/product/lu200924/

And yes Mike will be at Goulburn Swap Meet If you want him to take one there let us know.
I'll be at the swap meet, Pls. bring one of each along and I'll have a look
Thanks Pato
1957 Plunger, one of the very rare collector's items ;-)
Australia

Offline pato08

  • A's Best Friend
  • ***
  • Posts: 210
  • Karma: 0
  • A Work In Progress
Re: E3L dynamo end cap
« Reply #6 on: 20.01. 2019 21:48 »
Hey Brett,   walked around the swap meet three times, didn't see you guys ?
1957 Plunger, one of the very rare collector's items ;-)
Australia

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Posts: 7691
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: E3L dynamo end cap
« Reply #7 on: 21.01. 2019 04:17 »
G'day Pato.
I think it was Mike on the right around the corner not far in from the front gate. I didn't see any signage but one of the Dunsters said it was Mike that I got the 1106 head from.
I saw "Retired Fireman" Steve and "BSA_54A10" Trevor. I had my Forum tee on.
Cheers
'51 A7 plunger, '57 A7SS now A10CR, '76 XT500, '77 AG175 '83 CB1100F, '81 CB900F project.
Australia
Muskys Plunger A7

Offline a

  • Valued Contributor
  • ****
  • Posts: 274
  • Karma: 4
Re: E3L dynamo end cap
« Reply #8 on: 21.01. 2019 05:24 »
Sorry guys, I try my hardest to get the old man to take some form of signage, a t shirt, a simple laminated poster to put on table so people know who or where he is, but apparently these are crazy ideas  *conf* He did have them with him as I personally put them in his ute!
We have them on website or feel free to email.

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Posts: 7691
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: E3L dynamo end cap
« Reply #9 on: 21.01. 2019 09:07 »
G'day Brett.
Was it he who I got the 1106 off? He said he had manifolds at home.
Cheers
'51 A7 plunger, '57 A7SS now A10CR, '76 XT500, '77 AG175 '83 CB1100F, '81 CB900F project.
Australia
Muskys Plunger A7

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Posts: 7691
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: E3L dynamo end cap
« Reply #10 on: 21.01. 2019 09:14 »
Hay Pato.
You must have left early. I got there at 8am. As usual most of the good stuff goes on Sat arvo between the vendors.
Cheers
'51 A7 plunger, '57 A7SS now A10CR, '76 XT500, '77 AG175 '83 CB1100F, '81 CB900F project.
Australia
Muskys Plunger A7

Offline pato08

  • A's Best Friend
  • ***
  • Posts: 210
  • Karma: 0
  • A Work In Progress
Re: E3L dynamo end cap wanted
« Reply #11 on: 21.01. 2019 21:06 »
Hi Musky,  I arrived bang on 6am most vendors were still in bed. I did one slow lap (most guys still had their wears covered) then on the second got more serious, I did manage to purchase a fully reconed Voltage control unit for $25, I was hearing guys say they had picked up things on Saturday arvo. I would say this will be the last one I attend. So roll on Bulli Vintage Bike Show. ( might even have mine sorted).
1957 Plunger, one of the very rare collector's items ;-)
Australia

Offline a

  • Valued Contributor
  • ****
  • Posts: 274
  • Karma: 4
Re: E3L dynamo end cap wanted
« Reply #12 on: 21.01. 2019 23:02 »
G'day Brett.
Was it he who I got the 1106 off? He said he had manifolds at home.
Cheers
Yes just checked with him and he said yes.. Said he gave you a card??
All good, here is the manifolds anyways https://mikesclassiccyclespares.com/product/67-1112/


Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Posts: 2807
  • Karma: 66
Re: E3L dynamo end cap wanted
« Reply #13 on: 22.01. 2019 05:30 »
Cob didn't have one, Pato?
I was there from 6am until 9.30.
Picked up some trinkets and a few generator bits for stock and a brand new 357 camshaft.
Bloke with the cam had two Rocket heads for sale, $500 & $1000.
Steve had two A10 basket cases for sale, 1955 Flash and 1954 Road Rocket.
I didn't ask the price, didn't want to be tempted and I've got too many anyway.
Also two GA7 frames for $400 each but they had been butchered a bit.