Author Topic: Easy one... (rocker oil pipe routing)  (Read 189 times)

Offline Steverat

  • A's Best Friend
  • ***
  • Posts: 246
  • Karma: 1
Easy one... (rocker oil pipe routing)
« on: 06.02. 2019 13:09 »
I m at the stage in Josef's rebuild where the rocker oil pipe has to go on.
Now then, route it down infront of the seat tube or behind?


adm edit: topic title edited (to show topic subject).

1951 BSA A10 - now returned to Germany
1972 Triumph T100R Daytona
1924 B-S SS80
1965 Triumph SH Cub
1960 AJS M18CS

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Posts: 4970
  • Karma: 27
Re: Easy one... (rocker oil pipe routing)
« Reply #1 on: 06.02. 2019 15:02 »
Mine is routed at the front/drive-side of the down tube. The rubber filter boot touches it.
I suggest making a mock-up from something suitable, such as metal brake tube so you only have to bend the real pipe once.

Online morris

  • Wise & Enlightened
  • *
  • Posts: 1423
  • Karma: 22
  • Antwerp, Belgium
Re: Easy one... (rocker oil pipe routing)
« Reply #2 on: 06.02. 2019 15:32 »
Infront I'd say
'58 BSA A 10 SA
'52 BSA A 10 Plunger
'55 MORRIS ISIS
The world looks better from a motorbike
Belgium

Offline Swarfcut

  • Valued Contributor
  • ****
  • Posts: 424
  • Karma: 8
Re: Easy one... (rocker oil pipe routing)
« Reply #3 on: 06.02. 2019 16:00 »
    Mine crosses the top of the rockerbox, secured in a P clip on the right hand rearward rockerbox bolt.  It then clears the inspection cover and drops down the back of the barrel on the timing side of the frame tube to join the oil return to the tank. Part of the tube is an added transparent nylon sleeve, which offers a visual check and serves to  isolate vibration on the tank and fittings. Not the original layout, so your choice.

 Swarfy.

 Steve, Don't forget the missing stud through the top of the frame lug where front and rear sections join.  Yup...looking good.

Offline RogerSB

  • 1960 Golden Flash, Plymouth, Devon, England
  • Resident Legend
  • *****
  • Posts: 502
  • Karma: 5
Re: Easy one... (rocker oil pipe routing)
« Reply #4 on: 06.02. 2019 20:51 »
Photos of my (mainly original) 1960 S/Arm.
As Swarfy says, across the top and down the right side to oil tank.

(Edit) For 1960-62 rocker pipe is in two halves and joined by a rubber hose to alleviate vibration stress to fixed ends

1960 Golden Flash

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Posts: 4970
  • Karma: 27
Re: Easy one... (rocker oil pipe routing)
« Reply #5 on: 06.02. 2019 21:37 »
Don't forget that Steve's project is a Plunger. Pipe is continuous.

Offline Simon59

  • Moving Up
  • **
  • Posts: 56
  • Karma: 1
Re: Easy one... (rocker oil pipe routing)
« Reply #6 on: 07.02. 2019 12:12 »
Lovely picture, looks to me like a very tidy rebuild!  *smile*
Restoring a 1954 plunger framed A10 Golden Flash