« previous next »
Pages: [1]   Go Down

Author Topic: Dimensions for KS Bush 67-3151, See Photo, Pse?  (Read 601 times)

Offline Peter Gee

  • Valued Contributor
  • ****
  • Join Date: Apr 2015
  • Posts: 268
  • Karma: 1
Dimensions for KS Bush 67-3151, See Photo, Pse?
« on: 29.08. 2019 09:32 »
Hi guys, will probably have to have one of these turned from cast iron.

Can someone please  give the dimensions of this bush inc the flanged end so I may instruct the turner?  Thanks
Logged

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: Dimensions for KS Bush 67-3151, See Photo, Pse?
« Reply #1 on: 29.08. 2019 10:05 »
 Pete, it looks like  could be a kick start drive-section shaft bush maybe??? ...but maybe you need to be more specific to be sure to be sure to be su*bash*....re ... *conf*
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

ironhead

  • Guest
Re: Dimensions for KS Bush 67-3151, See Photo, Pse?
« Reply #2 on: 29.08. 2019 10:32 »
Hi PG.
You should give the bloke who's doing the machining both the K/S shaft & housing so he can measure both.
The hole in the housing often gets enlongated & if so will need to be bored round again ( oversize)
The shaft also wears & may need to be replaced.
Logged

Offline coater87

  • Wise & Enlightened
  • *
  • Join Date: Jul 2008
  • Posts: 1204
  • Karma: 6
Re: Dimensions for KS Bush 67-3151, See Photo, Pse?
« Reply #3 on: 29.08. 2019 12:25 »
 And while you are looking there, check the clutch actuator arm hole.

 You might want to get that bushed too. 

 Lee
Logged
Central Wisconsin in the U.S.

Offline Peter Gee

  • Valued Contributor
  • ****
  • Join Date: Apr 2015
  • Posts: 268
  • Karma: 1
Re: Dimensions for KS Bush 67-3151, See Photo, Pse?
« Reply #4 on: 29.08. 2019 13:48 »
Thanks Coater, I already did that one having found it oval!
Logged
Pages: [1]   Go Up
« previous next »