Author Topic: Made In England is becoming a disappointment  (Read 970 times)

Offline bl**dydrivers

  • Valued Contributor
  • ****
  • Join Date: Oct 2008
  • Posts: 258
  • Karma: 1
I just received a pair of Doherty Made In England handlebar grips and forgive me if I’m being too picky but the quality is horrendous.
They couldn’t line up both half’s of the mold, the grip pattern doesn’t line up and there’s a step of both ends.

Offline bl**dydrivers

  • Valued Contributor
  • ****
  • Join Date: Oct 2008
  • Posts: 258
  • Karma: 1
Re: Made In England is becoming a disappointment
« Reply #1 on: 06.05. 2019 14:54 »
Bar end

Offline bl**dydrivers

  • Valued Contributor
  • ****
  • Join Date: Oct 2008
  • Posts: 258
  • Karma: 1
Re: Made In England is becoming a disappointment
« Reply #2 on: 06.05. 2019 14:55 »
Inside end

Offline bl**dydrivers

  • Valued Contributor
  • ****
  • Join Date: Oct 2008
  • Posts: 258
  • Karma: 1
Re: Made In England is becoming a disappointment
« Reply #3 on: 06.05. 2019 14:56 »
Doherty is probably made by MCA

Online Rex

  • Wise & Enlightened
  • *
  • Join Date: Apr 2017
  • Posts: 1566
  • Karma: 7
Re: Made In England is becoming a disappointment
« Reply #4 on: 06.05. 2019 17:56 »
Probably no more made in England than a Suzuki is. Pattern sh*te again.

Offline RDfella

  • Wise & Enlightened
  • *
  • Join Date: Aug 2017
  • Posts: 2194
  • Karma: 15
Re: Made In England is becoming a disappointment
« Reply #5 on: 06.05. 2019 19:06 »
More like made in China & packaged in England. Or maybe not - some of the chinese stuff isn't bad. Just don't trust their metallurgy though.
'49 B31, '49 M21, '53 DOT, '58 Flash, '62 Flash special, '00 Firestorm, Weslake sprint bike.

Offline bl**dydrivers

  • Valued Contributor
  • ****
  • Join Date: Oct 2008
  • Posts: 258
  • Karma: 1
Re: Made In England is becoming a disappointment
« Reply #6 on: 06.05. 2019 20:34 »
Confirmed Doherty is owned by MCA and makes more sense. Never have been satisfied with MCA products!

Online KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 1940
  • Karma: 17
Re: Made In England is becoming a disappointment
« Reply #7 on: 06.05. 2019 22:23 »
Confirmed Doherty is owned by MCA and makes more sense. Never have been satisfied with MCA products!

Cheap rubber often smells of coal and better rubber doesn’t  (“they” appear to use cheap coal dust to make it black).
New Zealand

1956 A10 Golden Flash  (1st finished project)
1949 B31 rigid “400cc”  (2nd finished project)
1968 B44 Victor Special (3rd finished project)
2001 GL1800 Goldwing, well, the wife likes it
2009 KTM 990 Adventure, cos it’s 100% nuts

Offline BSA_54A10

  • Wise & Enlightened
  • *
  • Join Date: May 2008
  • Posts: 2544
  • Karma: 37
    • BSA National
Re: Made In England is becoming a disappointment
« Reply #8 on: 07.05. 2019 06:50 »
Synthetic rubber is black because carbon black is used as a filler.
If it is white then talc or ground chook feathers is the filler.
Neither of them serves any purpose other than to bulk out the material and protect against UV penetration.
What makes the difference is the binders
For decades the price of natural latex has gone lower than the floor as synthetics , particularly silicons replaced latex products.
So rubber compounders pack as much latex in as they can get away with and that is what causes rubber stuff to fall apart in short time.
Bike Beesa
Trevor