Author Topic: Wanted BSA A10 Alloy Head  (Read 221 times)

Offline 1985_Oyestein_RGS

  • Active
  • *
  • Posts: 8
  • Karma: 0
Wanted BSA A10 Alloy Head
« on: 26.06. 2019 21:14 »
Looking for a BSA A10 Alloy head. Has anyone got 1 for sale??

Offline cyclobutch

  • Wise & Enlightened
  • *
  • Posts: 1379
  • Karma: 13
Re: Wanted BSA A10 Alloy Head
« Reply #1 on: 27.06. 2019 09:04 »
Roger at Cake Street used to have a couple of shelves worth of them. Not sure now.
Various, including ...
'58 Iron Head Flash Bitza


Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Posts: 5179
  • Karma: 27
Re: Wanted BSA A10 Alloy Head
« Reply #2 on: 27.06. 2019 09:16 »
Welcome to this fabulous forum. We are a friendly group. Please, will you go to Introductions and tell us a little about your interest in 'A' series BSA's. Pictures are good.

Online RoyC

  • Resident Legend
  • *****
  • Posts: 851
  • Karma: 3
Re: Wanted BSA A10 Alloy Head
« Reply #3 on: 27.06. 2019 11:15 »
My bike is a 1958 A7SS
Stafford UK

Offline 1985_Oyestein_RGS

  • Active
  • *
  • Posts: 8
  • Karma: 0
Re: Wanted BSA A10 Alloy Head
« Reply #4 on: 27.06. 2019 20:31 »
Thins head on eBay has a lot of damage, especially close to the valve seat.not worth the risk, will keep looking, hopefully something may turn up.

Online chaterlea25

  • Wise & Enlightened
  • *
  • Posts: 3030
  • Karma: 45
Re: Wanted BSA A10 Alloy Head
« Reply #5 on: 27.06. 2019 20:59 »
Hi and welcome,
There was a very nice one sold on eBay in USA the other day
I have bought two from there over the years. The USA heads can be really low mileage so good condition

John
1961 Super Rocket
1963 RGS (ongoing)

Offline Rocket Racer

  • Wise & Enlightened
  • *
  • Posts: 1337
  • Karma: 16
  • A kiwi with a racing A10 rig
    • NZ Classic Sidecar Racing
Re: Wanted BSA A10 Alloy Head
« Reply #6 on: 12.07. 2019 01:20 »
presumably you're after the later single port head, not the 54/55 twin port head?
You can also fit an a7ss head if you can find one
A good rider periodically checks all nuts and bolts with a spanner to see that they are tight - Instruction Manual for BSA B series, p46, para 2.
New Zealand

Offline 1985_Oyestein_RGS

  • Active
  • *
  • Posts: 8
  • Karma: 0
Re: Wanted BSA A10 Alloy Head
« Reply #7 on: 12.07. 2019 21:29 »
I have an A7 SS head, I did contemplate fitting it but I'm not going racing with the bike so, thought I should settle for 8.25:1 pistons and a 357 cam and keep looking for an A10 single port head. Im sure to find 1 eventually  *smile*

Online bsa-bill

  • Wise & Enlightened
  • *
  • Posts: 5263
  • Karma: 60
Re: Wanted BSA A10 Alloy Head
« Reply #8 on: 12.07. 2019 21:58 »
When I get around to fettling my RGF back to GF I'll have one for sale, but got shed to finish, radiotherapy to undergo and life to lead in the meantime, so if you can't get one in the next three-four months just keep me in mind
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline 1985_Oyestein_RGS

  • Active
  • *
  • Posts: 8
  • Karma: 0
Re: Wanted BSA A10 Alloy Head
« Reply #9 on: 12.07. 2019 22:36 »
Thanks Bill. I will be patient so please do bear me in mind