Author Topic: Metal shavings in oil  (Read 1677 times)

Online Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1548
  • Karma: 20
Re: Metal shavings in oil
« Reply #45 on: 31.07. 2019 06:38 »
Quote

Yes I cut'em in half and make trophy's for the bike show.
Cheers

Quote
What do I need to do to win one of those, they’re lush!

Break down on the parade lap of the showground.
Good Advice
0
No reactions

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8478
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Metal shavings in oil
« Reply #46 on: 31.07. 2019 08:00 »
G'day Owain.
Good to hear your going for new pistons. What oversize are they? The old ones would take a lot of work to make trophy's let alone make good for re-use in your motor.
Minto. First you'd need to ship the bike over for the Berry Bike Show https://tinyurl.com/y3jd7spq I'll take good care of it, promise.
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Offline owain

  • A's Best Friend
  • ***
  • Join Date: Mar 2017
  • Posts: 144
  • Karma: 3
Re: Metal shavings in oil
« Reply #47 on: 31.07. 2019 16:32 »
Cheers again for the advice everyone. I left the cylinder and new pistons (+0.060") with the machinist today (SEP in Derbyshire...Not the one who did the orignal tight bore). It'll be honed to 0.0045"ish piston clearence, hopefully will pick it up and reassemble this weekend. Hopefully the next time these pistons will off will be when the cylinder will be lined and taken back to std bore!

I think I'll leave the old pistons in a box in the garage instead of on my wall. I don't want to be reminded of my appaulling running in procedure  *lol*
Good Advice
0
No reactions
Sweden & North Wales
'50 BSA A10
'69 BSA A75R

Online RDfella

  • Wise & Enlightened
  • *
  • Join Date: Aug 2017
  • Posts: 1013
  • Karma: 8
Re: Metal shavings in oil
« Reply #48 on: 31.07. 2019 17:58 »
Don't be hard on yourself - seems to me to be more a conflation of other issues than purely a running in matter.
Good Advice
0
No reactions
'49 B31, '49 M21, '53 DOT, '58 Flash, '00 Firestorm, Weslake sprint bike.

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4540
  • Karma: 41
Re: Metal shavings in oil
« Reply #49 on: 31.07. 2019 22:26 »

 
Quote
......It'll be honed to 0.0045"ish piston clearence, .......

 I read too many decimal places  *eek*    but to be sure, that's 4.5 thou hey....?
Good Advice
0
No reactions
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Online ironhead

  • A's Best Friend
  • ***
  • Join Date: Feb 2019
  • Posts: 199
  • Karma: 0
Re: Metal shavings in oil
« Reply #50 on: 31.07. 2019 23:07 »

 
Quote
......It'll be honed to 0.0045"ish piston clearence, .......

 I read too many decimal places  *eek*    but to be sure, that's 4.5 thou hey....?

That is 4.5 thou Dutch *smile* decimal is in the right place.
Good Advice
0
No reactions
SA