Author Topic: Road Rocket twin carb manifolds  (Read 248 times)

Offline benbow1947

  • Active
  • *
  • Join Date: Sep 2013
  • Posts: 8
  • Karma: 0
Road Rocket twin carb manifolds
« on: 29.08. 2019 22:53 »
Does anyone know of anybody who can supply twin carb inlet manifolds for my 1954 Road Rocket. I have a pair of chopped monoblocs. It starts and runs well on the TT carb, but the lack of a throttle stop is a pain in traffic.

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8027
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Road Rocket twin carb manifolds
« Reply #1 on: 30.08. 2019 10:58 »
G'day bb.
To give you a rough idea of what your looking for https://tinyurl.com/y5ex6pjx
http://atlanticgreen.com/a10dpm.htm
Look here (bottom of page) http://atlanticgreen.com/store.htm
http://www.britcycle.com/Products/67/67_1330_1331.htm
I made my own.
Cheers

'51 A7 plunger, '57 A7SS now A10CR, '76 XT500, '77 AG175 '83 CB1100F, '81 CB900F project.
Australia
Muskys Plunger A7

Offline benbow1947

  • Active
  • *
  • Join Date: Sep 2013
  • Posts: 8
  • Karma: 0
Re: Road Rocket twin carb manifolds
« Reply #2 on: 31.08. 2019 12:09 »
Hello Musky,

Unfortunately they are no longer available at Atlanticgreen. At least I will be able to get a pair made from the pictures and dimension

Cheers, Benbow

Offline bikerboy

  • Valued Contributor
  • ****
  • Join Date: Dec 2011
  • Posts: 336
  • Karma: 4
Re: Road Rocket twin carb manifolds
« Reply #3 on: 15.09. 2019 13:12 »
Like muskrat I made my own as well but I made it so that it was one piece instead of two pieces