BSA A10 Breather Replacement - Advise

[Greybeard]

Oh! so what I was taking about was the pressure release valve :) double nut,spring and small bearing to the front of the case.

Thanks

Al

Ah, ok, that's the PRV, (Pressure Relief Valve).

[ALPH1]

all oil ways cleaned and blown out.. have it back together just need to top up with oil and fire it up.. I found nothing in the oil that added up to a blockage so Im hopeful I either over filled it or the washer was the cause.. I'll update tomorrow!! Not much done in my other job today!! 

Thanks

Al   

[ironhead]

That never happens to me, Everything that arrives here is shagged out 
(or seized)



   Ditto

[ALPH1]

SUCCESS!! Not a drop of oil coming from the breather!! Only ran on the stand but it was coming out like a fire hose last time!

She's running lumpy and still erratic idle but Im sure a tune of of the carb will the root cause of that.

Guys thanks a lot for all the advise and help, hopefully this thread helps others like me in the future!

Thanks

Al




 

[Greybeard]

...erratic idle....

I'd prefer an erotic idyll 

[ALPH1]