« previous next »
Pages: [1]   Go Down

Author Topic: Air box dimensions. A10 plunger  (Read 785 times)

Offline fearie

  • Moving Up
  • **
  • Join Date: May 2019
  • Posts: 47
  • Karma: 0
    • My blog
Air box dimensions. A10 plunger
« on: 10.01. 2020 11:54 »
Hello!

Since I don't have an air box I would like to make a new one.
Can you please help me with dimensions?

Best regards
Logged
Poland
My bikes:
BSA A10 1951 plunger - project
SHL M11 1963
SHL M17 1969
Junak M10 1964
Velocette LE200 1955
Pannonia T5 with Duna sidecar 1968
Simson 425S 1959
Sunbeam s8 1954

Offline Nourish

  • A's Good Friend
  • ***
  • Join Date: Aug 2013
  • Posts: 124
  • Karma: 0
Re: Air box dimensions. A10 plunger
« Reply #1 on: 13.01. 2020 20:31 »
As mention in a previous post I have bought an air box that has been cut - https://www.a7a10.net/forum/index.php?topic=6124.0
But here is a layout of this box. I rubbed along the box through the paper to get an imprint and drew this in and hopefully scanned it to 1:1 but have included inch/mm scales.
Hope this helps to start with - if someone could do this with a complete one would be great for all.
Logged

Offline Simon59

  • A's Good Friend
  • ***
  • Join Date: Jan 2018
  • Posts: 116
  • Karma: 3
Re: Air box dimensions. A10 plunger
« Reply #2 on: 13.01. 2020 22:00 »
Hi! Here is a picture of my airbox/battery holder, which I've now fitted to the bike. But I could take some measurements for you if you want, maybe tell me what measurements you need? I know the original item is hard to fine, but I also know that it can be expensive to make one yourself. Cheers, Simon
Logged
Restored a 1954 plunger framed A10 Golden Flash - now finished!

Offline Simon59

  • A's Good Friend
  • ***
  • Join Date: Jan 2018
  • Posts: 116
  • Karma: 3
Re: Air box dimensions. A10 plunger
« Reply #3 on: 13.01. 2020 22:15 »
Hi fearie. Here's another picture of the other side of my airbox. Hope this helps
Logged
Restored a 1954 plunger framed A10 Golden Flash - now finished!

Offline Russ

  • A's Good Friend
  • ***
  • Join Date: Aug 2009
  • Posts: 247
  • Karma: 1
Re: Air box dimensions. A10 plunger
« Reply #4 on: 14.01. 2020 09:24 »
Hi fearie, attached are photo's of my airbox. I can "attempt" to make a template and take more photo's and measurements if you need.
However, I am heading off on holidays for a couple of weeks so will not be able to do it until I get back. Send me a PM if this may be helpful.
Russ
Logged
1951 A10 Plunger.
Australia

Offline Simon59

  • A's Good Friend
  • ***
  • Join Date: Jan 2018
  • Posts: 116
  • Karma: 3
Re: Air box dimensions. A10 plunger
« Reply #5 on: 14.01. 2020 10:02 »
Better pictures than mine!  *yeah*
Logged
Restored a 1954 plunger framed A10 Golden Flash - now finished!

Offline Nourish

  • A's Good Friend
  • ***
  • Join Date: Aug 2013
  • Posts: 124
  • Karma: 0
Re: Air box dimensions. A10 plunger
« Reply #6 on: 14.01. 2020 10:33 »
Hi Russ, I wouldn't mind a template to enable to restore mine if you could.
Cheers
Martin
Logged

Online Swarfcut

  • Wise & Enlightened
  • *
  • Join Date: Oct 2018
  • Posts: 2221
  • Karma: 54
Re: Air box dimensions. A10 plunger
« Reply #7 on: 14.01. 2020 10:59 »
This topic was hot a few weeks ago. For those folks that missed it, some enterprising fella is making the basic airbox carrier/battery mount. Still needs a battery tray to suit but looks a reasonable buy and a good starting point.             

Try this...   

  https://www.ebay.co.uk/itm/BSA-A7-A10-Battery-Carrier-Backplate-Mild-Steel-Undercoated-Rigid-Plunger/202769149391?hash=item2f35fbadcf:g:xP8AAOSwyExda9md

 Swarfy.
Logged

Offline Russ

  • A's Good Friend
  • ***
  • Join Date: Aug 2009
  • Posts: 247
  • Karma: 1
Re: Air box dimensions. A10 plunger
« Reply #8 on: 14.01. 2020 11:07 »
Thanks Swarfy yes that looks a reasonable starting point.
Martin send me a PM after 27th this month, I will be away till then, and I will do the best I can.
Russ
Logged
1951 A10 Plunger.
Australia

Offline fearie

  • Moving Up
  • **
  • Join Date: May 2019
  • Posts: 47
  • Karma: 0
    • My blog
Re: Air box dimensions. A10 plunger
« Reply #9 on: 14.01. 2020 11:16 »
Russ pm sent.
Templates would be appreciated!
Logged
Poland
My bikes:
BSA A10 1951 plunger - project
SHL M11 1963
SHL M17 1969
Junak M10 1964
Velocette LE200 1955
Pannonia T5 with Duna sidecar 1968
Simson 425S 1959
Sunbeam s8 1954

Offline fearie

  • Moving Up
  • **
  • Join Date: May 2019
  • Posts: 47
  • Karma: 0
    • My blog
Re: Air box dimensions. A10 plunger
« Reply #10 on: 14.01. 2020 11:17 »
Logged
Poland
My bikes:
BSA A10 1951 plunger - project
SHL M11 1963
SHL M17 1969
Junak M10 1964
Velocette LE200 1955
Pannonia T5 with Duna sidecar 1968
Simson 425S 1959
Sunbeam s8 1954

Offline fearie

  • Moving Up
  • **
  • Join Date: May 2019
  • Posts: 47
  • Karma: 0
    • My blog
Re: Air box dimensions. A10 plunger
« Reply #11 on: 19.01. 2020 10:44 »
Meanwhile in Poland...
Logged
Poland
My bikes:
BSA A10 1951 plunger - project
SHL M11 1963
SHL M17 1969
Junak M10 1964
Velocette LE200 1955
Pannonia T5 with Duna sidecar 1968
Simson 425S 1959
Sunbeam s8 1954

Offline fearie

  • Moving Up
  • **
  • Join Date: May 2019
  • Posts: 47
  • Karma: 0
    • My blog
Re: Air box dimensions. A10 plunger
« Reply #12 on: 06.02. 2020 08:05 »
More pictures
Logged
Poland
My bikes:
BSA A10 1951 plunger - project
SHL M11 1963
SHL M17 1969
Junak M10 1964
Velocette LE200 1955
Pannonia T5 with Duna sidecar 1968
Simson 425S 1959
Sunbeam s8 1954

Offline Nourish

  • A's Good Friend
  • ***
  • Join Date: Aug 2013
  • Posts: 124
  • Karma: 0
Re: Air box dimensions. A10 plunger
« Reply #13 on: 06.02. 2020 17:31 »
That's very good that is!
Logged
Pages: [1]   Go Up
« previous next »