Author Topic: 4 spring clutch lockwasher, recessed washer and nut  (Read 406 times)

Online Andy75sheffield

  • Moving Up
  • **
  • Join Date: Jun 2020
  • Posts: 5
  • Karma: 0
  • Let the build begin
Re: 4 spring clutch lockwasher, recessed washer and nut
« Reply #15 on: 14.01. 2021 12:52 »
G'day Berger.
Julian is on to it. Bin the tab washer & recesed washer. Use the thick plain washer & something like 262 loctite.
  If you are using a "pattern" *rant* shaft adapter, dry assemble the hub to it to make sure the hub splines are 1or 2 mm proud.
If not , grind that amount off the adapter end.  Had to do this recently to a "pattern"  *angry* Trihard  adapter.
Easy *beer*


 im having the same problem  would loctite nut lock 242e medium strength be any good or should i go out and buy some thing stronger

Online morris

  • Wise & Enlightened
  • *
  • Join Date: Aug 2012
  • Posts: 1669
  • Karma: 26
  • Antwerp, Belgium
Re: 4 spring clutch lockwasher, recessed washer and nut
« Reply #16 on: 14.01. 2021 14:31 »

 im having the same problem  would loctite nut lock 242e medium strength be any good or should i go out and buy some thing stronger

242 medium is perfect. I use it for years on the clutch nut without the lockwasher. Never had one come loose.
'58 BSA A 10 SA
'52 BSA A 10 Plunger
'55 MORRIS ISIS
The world looks better from a motorbike
Belgium