Author Topic: 67-3140 dimensions  (Read 88 times)

Offline fearie

  • Moving Up
  • **
  • Join Date: May 2019
  • Posts: 31
  • Karma: 0
    • My blog
67-3140 dimensions
« on: 14.02. 2020 08:00 »
Gi!

I can not buy 67-3140. Can you help me with dimensions? Ill make one by my own.

Best regards
Poland
My bikes:
BSA A10 1951 plunger - project
SHL M11 1963
SHL M17 1969
Junak M10 1964
Velocette LE200 1955
Pannonia T5 with Duna sidecar 1968
Simson 425S 1959

Online Sav

  • A's Best Friend
  • ***
  • Join Date: Jul 2011
  • Posts: 120
  • Karma: 2
  • VMCC Men of Kent and BSAOC member
    • Ashley, Ripple & Studdal Enthusiasts
1961 A10SR, spent a fortune at SRM
1961 A7SS, finally the right green
2011 New addition 1937 Empire Star, twin port, high pipes. Turned out to be the most unreliable bike I have handled.
2017 finally found the liner/barrel were flexing and causing all the overheating/nipping up. Early B33 barrel fitted and it's reliable at last!

Offline Swarfcut

  • Resident Legend
  • *****
  • Join Date: Oct 2018
  • Posts: 878
  • Karma: 12
Re: 67-3140 dimensions
« Reply #2 on: 14.02. 2020 09:41 »
 This is just a plain steel thin wall bush, easily made. It sticks out from the face of the cover by 2-3mm and is level with the casting face inside where the selector lever fits. Diameters you can get from your cover casting and gear selector shaft. Another cover complete or a bush from a damaged cover if you can find them are other possible sources.

 Swarfy.