Author Topic: 1955 A7SS Front Wheel Offset  (Read 292 times)

Offline tommo903

  • A's Good Friend
  • ***
  • Join Date: Aug 2016
  • Posts: 74
  • Karma: 0
1955 A7SS Front Wheel Offset
« on: 06.03. 2020 07:54 »
Morning all,

The front wheel on my A7SS is the type with the 8" diameter half width hub and I'm wondering if anyone has jotted down somewhere the offset dimensions please? Ideally, brake pad side to face of rim.

Thanks in advance,
Steve

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1385
  • Karma: 29
Re: 1955 A7SS Front Wheel Offset
« Reply #1 on: 06.03. 2020 09:08 »
The factory figure is 1 15/16 inch centre line of rim to edge of brake drum. You can find it on service sheet 79 on mikeb website;

http://bsa-info.nz/service-sheets/#1.ServiceSheets

Measurement to edge of rim are only accurate if the new rim is exactly the same width as the original

Offline tommo903

  • A's Good Friend
  • ***
  • Join Date: Aug 2016
  • Posts: 74
  • Karma: 0
Re: 1955 A7SS Front Wheel Offset
« Reply #2 on: 06.03. 2020 23:12 »
Great info Julian, never knew that existed.

Thanks...much appreciated!  *smile*

Steve