Author Topic: bsa powered rotavator  (Read 1484 times)

Online berger

  • Wise & Enlightened
  • *
  • Join Date: Nov 2017
  • Posts: 2910
  • Karma: 20
  • keith.uk 500sscafe.norbsa JDM honda 750fz
bsa powered rotavator
« on: 15.05. 2020 11:56 »
went to brothers to see how the workshop was progressing and came across this rotavator someone on the allotment owns. he's got it so he can make a copy of the complete clutch and mechanism for one of his rotavators, workshop is getting bigger since lockdown

Offline RDfella

  • Wise & Enlightened
  • *
  • Join Date: Aug 2017
  • Posts: 2193
  • Karma: 15
Re: bsa powered rotavator
« Reply #1 on: 15.05. 2020 20:01 »
Here's a pic I found online a while ago of a Clifford rotovator, powered by BSA M20 or M21 engine. We used to have one of these. A real handfull. Note timing case is modified to take a starting handle.
'49 B31, '49 M21, '53 DOT, '58 Flash, '62 Flash special, '00 Firestorm, Weslake sprint bike.

Offline chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4015
  • Karma: 54
Re: bsa powered rotavator
« Reply #2 on: 15.05. 2020 21:25 »
Hi All
I have a Howard "Gem" with a 600cc sv J.A.P
It's an absolute Beast  *eek*

John
1961 Super Rocket
1963 RGS (ongoing)

Online berger

  • Wise & Enlightened
  • *
  • Join Date: Nov 2017
  • Posts: 2910
  • Karma: 20
  • keith.uk 500sscafe.norbsa JDM honda 750fz
Re: bsa powered rotavator
« Reply #3 on: 16.05. 2020 19:50 »
hi john brother had to get this one back from the dead some years ago now, did months of work on it because most of it was ready for the scrap yard, he had to make loads of bits and couldn't get a howard transfer or sticker for it so he painted it on. it is a howard gem series 5 --30inch  16hp kohler petrol, as you said a beast, my dad used to have a simar rototiller -2 forward and 1 reverse gears . pictures of pictures on my old phone, I must fire up the new one that's been hanging about for months *whistle*

Offline BigJim

  • Resident Legend
  • *****
  • Join Date: Aug 2018
  • Posts: 537
  • Karma: 2
  • Bristol. UK
Re: bsa powered rotavator
« Reply #4 on: 16.05. 2020 21:23 »
Those beasts can sort some ground. Used one many times with my fathers landscaping business. *wink2* *beer*
Jamie,  Supporter of Distinguished Gentleman's Ride

Offline Joolstacho

  • Wise & Enlightened
  • *
  • Join Date: Jan 2010
  • Posts: 1094
  • Karma: 7
Re: bsa powered rotavator
« Reply #5 on: 17.05. 2020 00:28 »
Hi All
I have a Howard "Gem" with a 600cc sv J.A.P
It's an absolute Beast  *eek*

John
Here's the Howard that's in my keeping. (Note, this is mocked up with a nice BSA tank rather than the Harley one). There's a big problem with the magneto drive though, -(It needs to occupy the same part of the universe that's occupied by the Norton gearbox)! Just imagine, an Aussie Vee-twin.

NOTE: This has a Howard motor, not J.A.P.

"*eek*" indeed!

Offline chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4015
  • Karma: 54
Re: bsa powered rotavator
« Reply #6 on: 17.05. 2020 01:49 »
Hi Jools,
The japanese 600 is similar to the japanese bike engines but has small carb and probably a soft profile cam, dry sump lube system
the oil and petrol tank are combined with a filter unit on the return line
I have heard of those Howard V twin engines, All iron construction?
I have seen some attempts to fit them into bikes online but have heard that the engines do not like to rev ??

John
1961 Super Rocket
1963 RGS (ongoing)

Offline Joolstacho

  • Wise & Enlightened
  • *
  • Join Date: Jan 2010
  • Posts: 1094
  • Karma: 7
Re: bsa powered rotavator
« Reply #7 on: 17.05. 2020 02:23 »
John, actually (not "japanese"), but J.A.P. (J.A. Prestwich -London).

But yes this is an Australian manufactured engine, and yes, it weighs a ton, plenty of cast iron!
Yes, by all accounts pretty much a chugger, I'd imagine enormous torque though.

Offline Tomcat

  • Valued Contributor
  • ****
  • Join Date: May 2011
  • Posts: 434
  • Karma: 2
Re: bsa powered rotavator
« Reply #8 on: 17.05. 2020 07:43 »
This one was at the 2018 All British Rally. Fitted in a BSA frame, all new modern internals and only revs to 3,000 RPM.
59 Super Rocket 

Offline chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4015
  • Karma: 54
Re: bsa powered rotavator
« Reply #9 on: 17.05. 2020 18:44 »
Hi Jools,
Late at night I forgot to put the full stops between the letters, "system settings" change the word to Japanese  *conf2*

John
1961 Super Rocket
1963 RGS (ongoing)

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9813
  • Karma: 49
Re: bsa powered rotavator
« Reply #10 on: 17.05. 2020 19:18 »
Many years ago I was asked by a gardener friend to help him with his work. He asked me to run his Allen Scythe over the overgrown village graveyard. I'd never used one but I thought, how hard can it be?

As you probably know, these machines are very heavy and very strong. They need someone who knows what they are doing in charge of them. I did not know what I was doing!
I got the thing started and put it in gear. Off we went; the scythe was practically dragging me along. The long grass and weeds were falling all around me. I suddenly realised I was headed for the hedge! Before I managed to take it out of gear the blades were wreaking havoc among the trunks of the hedgerow. I had a quick look around; no one was watching! I put the scythe in reverse and pulled back. The hedge looked no different but I knew that it was just a matter of time before a new entrance into the graveyard would appear. I never offered to help my friend again.  ::hh::

That was nearly 40 years ago. I hope the hedge has recovered by now.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline Joolstacho

  • Wise & Enlightened
  • *
  • Join Date: Jan 2010
  • Posts: 1094
  • Karma: 7
Re: bsa powered rotavator
« Reply #11 on: 18.05. 2020 02:27 »
Hi Jools,
Late at night I forgot to put the full stops between the letters, "system settings" change the word to Japanese  *conf2*

John

Haha... that's your damn politically-correct spell-checker for you! *beer*