Author Topic: Magneto Cable removal.  (Read 144 times)

Offline Mick

  • Moving Up
  • **
  • Join Date: Nov 2019
  • Posts: 21
  • Karma: 0
Magneto Cable removal.
« on: 03.05. 2020 18:01 »
G’day. Do I have to remove the Magneto from the engine to replace the cable on a ‘53 650. Can’t seem to get a spanner  on the small nuts where the kill switch attaches.


  • Guest
Re: Magneto Cable removal.
« Reply #1 on: 03.05. 2020 19:27 »
Which cable are you trying to replace? Which type of magneto do you have? Sounds like an early one with the kill button on the end of the mag. A picture would help.

Offline bikerboy

  • Valued Contributor
  • ****
  • Join Date: Dec 2011
  • Posts: 379
  • Karma: 4
Re: Magneto Cable removal.
« Reply #2 on: 04.05. 2020 01:52 »
I would cut the cable before I took the mag off unless you need the mag off for some reason or another but beezermacc is right exactly what cable are you trying to get off? If its the kill switch cable itself a pair of pliers will normally do that easy enough